Remove nt/msysconfig.sh

* configure.ac [MINGW32]: Source nt/mingw-cfg.site.

* make-dist: Don't distribute nt/msysconfig.sh.

* nt/msysconfig.sh: Remove.

* nt/INSTALL: Update for this.

* nt/mingw-cfg.site: Comment.

4 files changed, 22 insertions, 55 deletions

diff --git a/nt/ChangeLog b/nt/ChangeLog
index c90e3105fa8..1b766f0f349 100644
--- a/nt/ChangeLog
+++ b/nt/ChangeLog
@@ -1,3 +1,8 @@
+2013-11-12  Dani Moncayo  <dmoncayo@gmail.com>
+
+        * msysconfig.sh: Remove.
+        * INSTALL: Update for this.
+
 2013-11-09  Glenn Morris  <rgm@gnu.org>
 
         * mingw-cfg.site: No need for this to be executable.
diff --git a/nt/INSTALL b/nt/INSTALL
index 9f7311430f0..434327b66cc 100644
--- a/nt/INSTALL
+++ b/nt/INSTALL
@@ -31,15 +31,15 @@ Windows 9X as well).
   1. If you want to build Emacs outside of the source tree
      (recommended), create the build directory and chdir there.
 
-  2. Invoke the MSYS-specific configure script:
+  2. Invoke the configure script:
 
       - If you are building outside the source tree:
 
-        /PATH/TO/EMACS/SOURCE/TREE/nt/msysconfig.sh --prefix=PREFIX ...
+        /PATH/TO/EMACS/SOURCE/TREE/configure --prefix=PREFIX ...
 
       - If you are building in-place, i.e. inside the source tree:
 
-        ./nt/msysconfig.sh --prefix=PREFIX ...
+        ./configure --prefix=PREFIX ...
 
      It is always preferable to use --prefix to configure Emacs for
      some specific location of its installed tree; the default
@@ -49,7 +49,7 @@ Windows 9X as well).
      You can pass other options to the configure script.  Here's a
      typical example (for an in-place debug build):
 
-       CPPFLAGS='-DGLYPH_DEBUG=1' CFLAGS='-O0 -g3' ./nt/msysconfig.sh --prefix=/d/usr/emacs --enable-checking
+       CPPFLAGS='-DGLYPH_DEBUG=1' CFLAGS='-O0 -g3' ./configure --prefix=/d/usr/emacs --enable-checking
 
   3. After the configure script finishes, it should display the
      resulting configuration.  After that, type
@@ -313,11 +313,11 @@ Windows 9X as well).
 
   You invoke the configure script like this:
 
-     /PATH/TO/EMACS/SOURCE/TREE/nt/msysconfig.sh --prefix=PREFIX ...
+     /PATH/TO/EMACS/SOURCE/TREE/configure --prefix=PREFIX ...
 
   or, if you are building in-place, i.e. inside the source tree:
 
-     ./nt/msysconfig.sh --prefix=PREFIX ...
+     ./configure --prefix=PREFIX ...
 
   Here PREFIX is the place where you eventually want to install Emacs
   once built, e.g. /d/usr.  We recommend to always use --prefix when
@@ -337,12 +337,12 @@ Windows 9X as well).
   Windows-style file names was reported to cause subtle and hard to
   figure out problems during the build.  This applies both to the
   command switches, such as --prefix=, and to the absolute file name
-  of msysconfig.sh, if you are building outside of the source tree.
+  of 'configure', if you are building outside of the source tree.
 
   You can pass additional options to the configure script, for the
   full list type
 
-     ./nt/msysconfig.sh --help
+     ./configure --help
 
   As explained in the help text, you may need to tell the script what
   are the optional flags to invoke the compiler.  This is needed if
@@ -355,7 +355,7 @@ Windows 9X as well).
   headers in C:\emacs\libs\jpeg-6b-4-lib\include, you will need to say
   something like this:
 
-    CPPFLAGS='-I/c/emacs/libs/libpng-1.2.37-lib/include -I/c/emacs/libs/jpeg-6b-4-lib/include' ./nt/msysconfig.sh --prefix=PREFIX
+    CPPFLAGS='-I/c/emacs/libs/libpng-1.2.37-lib/include -I/c/emacs/libs/jpeg-6b-4-lib/include' ./configure --prefix=PREFIX
 
   which is quite a mouth-full, especially if you have more directories
   to specify...  Perhaps you may wish to revisit your installation
@@ -363,9 +363,9 @@ Windows 9X as well).
 
   If you have a global site-lisp directory from previous Emacs
   installation, and you want Emacs to continue using it, specify it
-  via the --enable-locallisppath switch to msysconfig.sh, like this:
+  via the --enable-locallisppath switch to 'configure', like this:
 
-   ./nt/msysconfig.sh --prefix=PREFIX --enable-locallisppath="/d/usr/share/emacs/VERSION/site-lisp:/d/wherever/site-lisp"
+   ./configure --prefix=PREFIX --enable-locallisppath="/d/usr/share/emacs/VERSION/site-lisp:/d/wherever/site-lisp"
 
   Use the normal MSYS /d/foo/bar style to specify directories by their
   absolute file names.
@@ -373,7 +373,7 @@ Windows 9X as well).
   A few frequently used options are needed when you want to produce an
   unoptimized binary with runtime checks enabled:
 
-     CPPFLAGS='-DGLYPH_DEBUG=1' CFLAGS='-O0 -g3' ./nt/msysconfig.sh --prefix=PREFIX --enable-checking
+     CPPFLAGS='-DGLYPH_DEBUG=1' CFLAGS='-O0 -g3' ./configure --prefix=PREFIX --enable-checking
 
   Once invoked, the configure script will run for some time, and, if
   successful, will eventually produce a summary of the configuration
diff --git a/nt/mingw-cfg.site b/nt/mingw-cfg.site
index 0499e88a72b..0be24dde12f 100644
--- a/nt/mingw-cfg.site
+++ b/nt/mingw-cfg.site
@@ -12,10 +12,11 @@
 # value of a shell variable ac_cv_header_foo_h.  The value should be
 # yes if the header is deemed to exist, no otherwise.  Or it could be
 # something else, if the value computed by 'configure' requires that.
-# In general, since configure instructs GCC to use header files
-# in nt/inc, you should not need to futz with header file tests.  But
-# there are exceptions, like with getopt.h below (which is a MinGW
-# system header, but we do not want to use it).
+# In general, since configure (when invoked from an MSYS environment)
+# instructs GCC to use header files in nt/inc, you should not need to
+# futz with header file tests.  But there are exceptions, like with
+# getopt.h below (which is a MinGW system header, but we do not want
+# to use it).
 #
 # For each library function foo you want to supply test results, set
 # the value of a shell variable ac_cv_func_foo.  Again, the value is
diff --git a/nt/msysconfig.sh b/nt/msysconfig.sh
deleted file mode 100644
index 45bbf130b00..00000000000
--- a/nt/msysconfig.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#! /bin/sh
-### msysconfig.sh - Run the top-level 'configure' script as appropriate
-### for the MinGW/MSYS build of a native MS-Windows port of Emacs.
-
-## Copyright (C) 2013 Free Software Foundation, Inc.
-
-## Author: Eli Zaretskii <eliz@gnu.org>
-
-## This file is part of GNU Emacs.
-
-## GNU Emacs is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 3 of the License, or
-## (at your option) any later version.
-
-## GNU Emacs is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-
-## You should have received a copy of the GNU General Public License
-## along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
-
-### Commentary:
-
-## The Posix 'configure' script needs a few tweaks to produce desired
-## results when running under MSYS with the purpose of configuring
-## Emacs for the MinGW MS-Windows build.  Rather than asking users to
-## type these tweaks every time they configure the package, we provide
-## this helper script which takes care of the mundane things.
-
-### Code:
-
-srcdir=`dirname "$0"`
-parent=`dirname "$srcdir"`
-
-## The nt/mingw-cfg.site file provides various autoconf variables that
-## are needed for a successful MinGW build.
-CONFIG_SITE="$srcdir/mingw-cfg.site" $parent/configure "$@"