Remove more hand-written node pointers in doc/misc

13 files changed, 358 insertions, 447 deletions

diff --git a/doc/misc/ChangeLog b/doc/misc/ChangeLog
index f1759b5603a..4ced0e00009 100644
--- a/doc/misc/ChangeLog
+++ b/doc/misc/ChangeLog
@@ -1,5 +1,9 @@
 2012-12-22  Glenn Morris  <rgm@gnu.org>
 
+        * ada-mode.texi, ebrowse.texi, ediff.texi, ert.texi, eshell.texi:
+        * eudc.texi, idlwave.texi, rcirc.texi, remember.texi, ses.texi:
+        * speedbar.texi, vip.texi: Nuke hand-written node pointers.
+
         * Makefile.in (gfdl): New variable.  Use throughout where
         appropriate so that targets depend on doclicense.texi.
 
diff --git a/doc/misc/ada-mode.texi b/doc/misc/ada-mode.texi
index f4c29bb6e16..30ad0359264 100644
--- a/doc/misc/ada-mode.texi
+++ b/doc/misc/ada-mode.texi
@@ -37,7 +37,7 @@ modify this GNU manual.''
 
 @contents
 
-@node Top, Overview, (dir), (dir)
+@node Top
 @top Ada Mode
 
 @ifnottex
@@ -64,7 +64,7 @@ modify this GNU manual.''
 @end menu
 
 
-@node Overview, Installation, Top, Top
+@node Overview
 @chapter Overview
 
 The Emacs mode for programming in Ada helps the user in understanding
@@ -96,7 +96,7 @@ and other GNAT commands.
 See the Emacs info manual, section 'Running Debuggers Under Emacs',
 for general information on debugging.
 
-@node Installation, Customization, Overview, Top
+@node Installation
 @chapter Installation
 
 Ada mode is part of the standard Emacs distribution; if you use that,
@@ -136,7 +136,7 @@ GNAT-specific).
 
 @end itemize
 
-@node Customization, Compiling Executing, Installation, Top
+@node Customization
 @chapter Customizing Ada mode
 
 Here we assume you are familiar with setting variables in Emacs,
@@ -175,7 +175,7 @@ See the Emacs help for each of these variables for more information.
 * Other customization::
 @end menu
 
-@node Non-standard file names, Other compiler, Customization, Customization
+@node Non-standard file names
 @section Non-standard file names
 
 By default, Ada mode is configured to use the GNAT file naming
@@ -217,7 +217,7 @@ rewrite the function @code{ada-make-filename-from-adaname}. Doing that
 is beyond the scope of this manual; see the current definitions in
 @file{ada-mode.el} and @file{ada-xref.el} for examples.
 
-@node Other compiler, Other customization, Non-standard file names, Customization
+@node Other compiler
 @section Other compiler
 
 By default, Ada mode is configured to use the Gnu Ada compiler GNAT.
@@ -227,7 +227,7 @@ used to run that compiler, either in lisp variables or in Emacs
 Ada mode project files. See @ref{Project file variables} for the list
 of project variables, and the corresponding lisp variables.
 
-@node Other customization,  , Other compiler, Customization
+@node Other customization
 @section Other customization
 
 All user-settable Ada mode variables can be set via the menu
@@ -245,7 +245,7 @@ and the syntax to set a variable is the following:
 (setq variable-name value)
 @end example
 
-@node Compiling Executing, Project files, Customization, Top
+@node Compiling Executing
 @chapter Compiling Executing
 
 Ada projects can be compiled, linked, and executed using commands on
@@ -263,7 +263,7 @@ file variables referenced here.
 * Compiler errors::
 @end menu
 
-@node Compile commands, Compiler errors, Compiling Executing, Compiling Executing
+@node Compile commands
 @section Compile commands
 
 Here are the commands for building and using an Ada project, as
@@ -346,7 +346,7 @@ Invoke @samp{Ada | Project | Load}, and load a project file that specifies @code
 
 @end enumerate
 
-@node Compiler errors,  , Compile commands, Compiling Executing
+@node Compiler errors
 @section Compiler errors
 
 The @code{Check file}, @code{Compile file}, and @code{Build} commands
@@ -366,7 +366,7 @@ Some error messages might also include references to other files. These
 references are also clickable in the same way, or put point after the
 line number and press @key{RET}.
 
-@node Project files, Compiling Examples, Compiling Executing, Top
+@node Project files
 @chapter Project files
 
 An Emacs Ada mode project file specifies what directories hold sources
@@ -385,7 +385,7 @@ an Emacs Ada mode project file.
 * Project file variables::
 @end menu
 
-@node Project File Overview, GUI Editor, Project files, Project files
+@node Project File Overview
 @section Project File Overview
 
 Project files have a simple syntax; they may be edited directly. Each
@@ -450,7 +450,7 @@ file extension; if it is @code{.gpr}, the file is treated as a GNAT
 project file. Any other extension is treated as an Emacs Ada mode
 project file.
 
-@node GUI Editor, Project file variables, Project File Overview, Project files
+@node GUI Editor
 @section GUI Editor
 
 The project file editor is invoked with the menu @samp{Ada | Projects
@@ -461,7 +461,7 @@ modification using the @samp{[save]} button at the bottom of the
 buffer, or the @kbd{C-x C-s} binding. To cancel your modifications,
 kill the buffer or click on the @samp{[cancel]} button.
 
-@node Project file variables,  , GUI Editor, Project files
+@node Project file variables
 @section Project file variables
 
 The following variables can be defined in a project file; some can
@@ -648,7 +648,7 @@ commands and source navigation.
 
 @end table
 
-@node Compiling Examples, Moving Through Ada Code, Project files, Top
+@node Compiling Examples
 @chapter Compiling Examples
 
 We present several small projects, and walk thru the process of
@@ -670,7 +670,7 @@ website mentioned in @xref{Installation}.
 * Use multiple GNAT project files::
 @end menu
 
-@node No project files, Set compiler options, Compiling Examples, Compiling Examples
+@node No project files
 @section No project files
 This example uses no project files.
 
@@ -836,7 +836,7 @@ Invoke @samp{Ada | Project | Load}, and load a project file that specifies @code
 
 @end enumerate
 
-@node Set compiler options, Set source search path, No project files, Compiling Examples
+@node Set compiler options
 @section Set compiler options
 
 This example illustrates using an Emacs Ada mode project file to set a
@@ -898,7 +898,7 @@ used to set the compiler options.
 Fixing the error, linking and running the code proceed as in @ref{No
 project files}.
 
-@node Set source search path, Use GNAT project file, Set compiler options, Compiling Examples
+@node Set source search path
 @section Set source search path
 
 In this example, we show how to deal with files in more than one
@@ -982,7 +982,7 @@ compiler error message.
 Fixing the error, linking and running the code proceed as in @ref{No
 project files}.
 
-@node Use GNAT project file, Use multiple GNAT project files, Set source search path, Compiling Examples
+@node Use GNAT project file
 @section Use GNAT project file
 
 In this example, we show how to use a GNAT project file, with no Ada
@@ -1061,7 +1061,7 @@ set the compiler options.
 Fixing the error, linking and running the code proceed as in @ref{No
 project files}.
 
-@node Use multiple GNAT project files,  , Use GNAT project file, Compiling Examples
+@node Use multiple GNAT project files
 @section Use multiple GNAT project files
 
 In this example, we show how to use multiple GNAT project files,
@@ -1125,7 +1125,7 @@ Now type @kbd{C-x `}. @file{Example_4/hello_pkg.adb} is shown,
 demonstrating that @file{hello_5.gpr} and @file{hello_4.gpr} are being
 used to set the compilation search path.
 
-@node Moving Through Ada Code, Identifier completion, Compiling Examples, Top
+@node Moving Through Ada Code
 @chapter Moving Through Ada Code
 
 There are several easy to use commands to navigate through Ada code. All
@@ -1179,7 +1179,7 @@ If the @code{ada-xref-create-ali} variable is non-@code{nil}, Emacs
 will try to run GNAT for you whenever cross-reference information is
 needed, and is older than the current source file.
 
-@node Identifier completion, Automatic Smart Indentation, Moving Through Ada Code, Top
+@node Identifier completion
 @chapter Identifier completion
 
 Emacs and Ada mode provide two general ways for the completion of
@@ -1224,7 +1224,7 @@ Complete current identifier using cross-reference information.
 Complete identifier using buffer information (not Ada-specific).
 @end table
 
-@node Automatic Smart Indentation, Formatting Parameter Lists, Identifier completion, Top
+@node Automatic Smart Indentation
 @chapter Automatic Smart Indentation
 
 Ada mode comes with a full set of rules for automatic indentation. You
@@ -1301,7 +1301,7 @@ Indent the current line and display the name of the variable used for
 indentation.
 @end table
 
-@node Formatting Parameter Lists, Automatic Casing, Automatic Smart Indentation, Top
+@node Formatting Parameter Lists
 @chapter Formatting Parameter Lists
 
 @table @kbd
@@ -1314,7 +1314,7 @@ This aligns the declarations on the colon (@samp{:}) separating
 argument names and argument types, and aligns the @code{in},
 @code{out} and @code{in out} keywords.
 
-@node Automatic Casing, Statement Templates, Formatting Parameter Lists, Top
+@node Automatic Casing
 @chapter Automatic Casing
 
 Casing of identifiers, attributes and keywords is automatically
@@ -1403,7 +1403,7 @@ Rereads the exception dictionary from the file
 @code{ada-case-exception-file} (@code{ada-case-read-exceptions}).
 @end table
 
-@node Statement Templates, Comment Handling, Automatic Casing, Top
+@node Statement Templates
 @chapter Statement Templates
 
 Templates are defined for most Ada statements, using the Emacs
@@ -1494,7 +1494,7 @@ exception (@code{ada-exception}).
 type (@code{ada-type}).
 @end table
 
-@node Comment Handling, GNU Free Documentation License, Statement Templates, Top
+@node Comment Handling
 @chapter Comment Handling
 
 By default, comment lines get indented like Ada code. There are a few
@@ -1513,11 +1513,11 @@ Uncomment the selected region
 autofill the current comment.
 @end table
 
-@node GNU Free Documentation License, Index, Comment Handling, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
-@node Index,  , GNU Free Documentation License, Top
+@node Index
 @unnumbered Index
 
 @printindex fn
diff --git a/doc/misc/ebrowse.texi b/doc/misc/ebrowse.texi
index 3294d10db2b..6a6772f6f54 100644
--- a/doc/misc/ebrowse.texi
+++ b/doc/misc/ebrowse.texi
@@ -44,7 +44,7 @@ modify this GNU manual.''
 @contents
 
 @ifnottex
-@node Top, Overview, (dir), (dir)
+@node Top
 @top Ebrowse
 
 You can browse C++ class hierarchies from within Emacs by using
@@ -67,7 +67,7 @@ Ebrowse.
 
 
 
-@node Overview, Generating browser files, Top, Top
+@node Overview
 @chapter Introduction
 
 When working in software projects using C++, I frequently missed
@@ -177,8 +177,7 @@ them, if you like.
 
 
 
-@node Generating browser files, Loading a Tree, Overview, Top
-@comment node-name,  next,  previous,  up
+@node Generating browser files
 @chapter Processing Source Files
 
 @cindex @command{ebrowse}, the program
@@ -225,7 +224,7 @@ available command line options.@refill
 
 
 @comment name,     next,        prev,                     up
-@node Input files, Output file, Generating browser files, Generating browser files
+@node Input files
 @section Specifying Input Files
 
 @table @samp
@@ -266,7 +265,7 @@ properly identifying friend functions of a class.
 
 
 @comment name,     next,               prev,        up
-@node Output file, Structs and unions, Input files, Generating browser files
+@node Output file
 @section Changing the Output File Name
 
 @table @samp
@@ -301,7 +300,7 @@ with this command line option.
 
 
 @comment name,            next,     prev,        up
-@node Structs and unions, Matching, Output file, Generating browser files
+@node Structs and unions
 @section Structs and Unions
 @cindex structs
 @cindex unions
@@ -321,7 +320,7 @@ tree.
 
 
 @comment name,  next,      prev,               up
-@node Matching, Verbosity, Structs and unions, Generating browser files
+@node Matching
 @section Regular Expressions
 
 @cindex regular expressions, recording
@@ -374,8 +373,7 @@ the probability that it will no longer match after editing the file.
 
 
 
-@node Verbosity, , Matching, Generating browser files
-@comment  node-name,  next,  previous,  up
+@node Verbosity
 @section Verbose Mode
 @cindex verbose operation
 
@@ -395,8 +393,7 @@ the names of the classes seen.
 
 
 
-@node Loading a Tree, Tree Buffers, Generating browser files, Top
-@comment  node-name,  next,  previous,  up
+@node Loading a Tree
 @chapter Starting to Browse
 @cindex loading
 @cindex browsing
@@ -436,8 +433,7 @@ where no highlight is displayed.
 @comment ***
 @comment ****************************************************************
 
-@node Tree Buffers, Member Buffers, Loading a Tree, Top
-@comment  node-name,  next,  previous,  up
+@node Tree Buffers
 @chapter Tree Buffers
 @cindex tree buffer mode
 @cindex class trees
@@ -468,8 +464,7 @@ buffers.
 
 
 
-@node Source Display, Member Display, Tree Buffers, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Source Display
 @section Viewing and Finding Class Declarations
 @cindex viewing, class
 @cindex finding a class
@@ -497,8 +492,7 @@ The same functionality is available from the menu opened with
 
 
 
-@node Member Display, Go to Class, Source Display, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Member Display
 @section Displaying Members
 @cindex @samp{*Members*} buffer
 @cindex @samp{*Globals*}
@@ -561,8 +555,7 @@ These lists are also available from the class' context menu invoked with
 
 
 
-@node Go to Class, Quitting, Member Display, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Go to Class
 @section Finding a Class
 @cindex locate class
 @cindex expanding branches
@@ -589,8 +582,7 @@ local copy of the regular expression last searched in it.
 
 
 
-@node Quitting, File Name Display, Go to Class, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Quitting
 @section Burying a Tree Buffer
 @cindex burying tree buffer
 
@@ -602,8 +594,7 @@ Is a synonym for @kbd{M-x bury-buffer}.
 
 
 
-@node File Name Display, Expanding and Collapsing, Quitting, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node File Name Display
 @section Displaying File Names
 
 @table @kbd
@@ -633,8 +624,7 @@ Here is an example of a tree buffer with file names displayed.
 @end example
 
 
-@node Expanding and Collapsing, Tree Indentation, File Name Display, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Expanding and Collapsing
 @section Expanding and Collapsing a Tree
 @cindex expand tree branch
 @cindex collapse tree branch
@@ -673,8 +663,7 @@ This command expands all collapsed branches in the tree.
 
 
 
-@node Tree Indentation, Killing Classes, Expanding and Collapsing, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Tree Indentation
 @section Changing the Tree Indentation
 @cindex tree indentation
 @cindex indentation of the tree
@@ -689,8 +678,7 @@ available from the tree buffer's context menu.
 
 
 
-@node Killing Classes, Saving a Tree, Tree Indentation, Tree Buffers
-@comment  node-name,  next,  previous,  up
+@node Killing Classes
 @section Removing Classes from the Tree
 @cindex killing classes
 @cindex class, remove from tree
@@ -705,9 +693,7 @@ deletion is actually performed.
 
 
 
-@node Saving a Tree, Statistics, Killing Classes, Tree Buffers
-@comment  node-name,  next,  previous,  up
-@comment node-name, next, previous, up
+@node Saving a Tree
 @section Saving a Tree
 @cindex save tree to a file
 @cindex tree, save to a file
@@ -725,8 +711,8 @@ Writes the tree to a file whose name is read from the minibuffer.
 
 
 
-@node     Statistics, Marking Classes, Saving a Tree, Tree Buffers
-@comment  node-name,  next,        previous, up
+@node     Statistics
+@section Statistics
 @cindex statistics for a tree
 @cindex tree statistics
 @cindex class statistics
@@ -741,8 +727,8 @@ context menu.
 
 
 
-@node     Marking Classes, , Statistics, Tree Buffers
-@comment  node-name,       next,       previous,      up
+@node     Marking Classes
+@section Marking Classes
 @cindex marking classes
 @cindex operations on marked classes
 
@@ -783,8 +769,7 @@ display, like in the following example
 @c ***
 @c ****************************************************************
 
-@node Member Buffers, Tags-like Functions, Tree Buffers, Top
-@comment  node-name,       next,       previous,      up
+@node Member Buffers
 @chapter Member Buffers
 @cindex members
 @cindex member buffer mode
@@ -834,8 +819,7 @@ buffer: members, classes, and the buffer itself.
 
 
 
-@node Switching Member Lists, Finding/Viewing, Member Buffers, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Switching Member Lists
 @section Switching Member Lists
 @cindex member lists, in member buffers
 @cindex static members
@@ -881,8 +865,7 @@ context menu.
 
 
 
-@node Finding/Viewing, Inherited Members, Switching Member Lists, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Finding/Viewing
 @section Finding and Viewing Member Source
 @cindex finding members, in member buffers
 @cindex viewing members, in member buffers
@@ -919,8 +902,7 @@ displayed when clicking @kbd{Mouse-2} on a member name.
 
 
 
-@node Inherited Members, Searching Members, Finding/Viewing, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Inherited Members
 @section Display of Inherited Members
 @cindex superclasses, members
 @cindex base classes, members
@@ -935,8 +917,7 @@ buffer.  This is also in the buffer's context menu.
 
 
 
-@node Searching Members, Switching to Tree, Inherited Members, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Searching Members
 @section Searching Members
 @cindex searching members
 
@@ -965,8 +946,7 @@ a mouse.
 
 
 
-@node Switching to Tree, Filters, Searching Members, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Switching to Tree
 @section Switching to Tree Buffer
 @cindex tree buffer, switch to
 @cindex buffer switching
@@ -984,8 +964,7 @@ displayed in the member buffer.
 
 
 
-@node Filters, Attributes, Switching to Tree, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Filters
 @section Filters
 @cindex filters
 
@@ -1029,8 +1008,7 @@ These commands are also found in the buffer's context menu.
 
 
 
-@node Attributes, Long and Short Display, Filters, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Attributes
 @section Displaying Member Attributes
 @cindex attributes
 @cindex member attribute display
@@ -1086,8 +1064,7 @@ This command is also in the buffer's context menu.
 
 
 
-@node Long and Short Display, Regexp Display, Attributes, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Long and Short Display
 @section Long and Short Member Display
 @cindex display form
 @cindex long display
@@ -1121,8 +1098,7 @@ not been produced with the @command{ebrowse} option @samp{--no-regexps}.
 
 
 
-@node Regexp Display, Switching Classes, Long and Short Display, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Regexp Display
 @section Display of Regular Expressions
 @cindex regular expression display
 
@@ -1140,8 +1116,7 @@ see @ref{Matching, --no-regexps, Regular Expressions}.
 
 
 
-@node Switching Classes, Killing/Burying, Regexp Display, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Switching Classes
 @section Displaying Another Class
 @cindex base class, display
 @cindex derived class, display
@@ -1173,8 +1148,7 @@ Switch to the next sibling of the class in the class tree.
 
 
 
-@node Killing/Burying, Column Width, Switching Classes, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Killing/Burying
 @section Burying a Member Buffer
 @cindex burying member buffers
 
@@ -1186,8 +1160,7 @@ This command is a synonym for @kbd{M-x bury-buffer}.
 
 
 
-@node Column Width, Redisplay, Killing/Burying, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Column Width
 @section Setting the Column Width
 @cindex column width
 @cindex member indentation
@@ -1202,8 +1175,7 @@ This command sets the column width depending on the display form used
 
 
 
-@node Redisplay, Getting Help, Column Width, Member Buffers
-@comment  node-name,       next,       previous,      up
+@node Redisplay
 @section Forced Redisplay
 @cindex redisplay of member buffers
 
@@ -1218,8 +1190,8 @@ columns.
 
 
 
-@node Getting Help, , Redisplay, Member Buffers
-@comment  node-name,  next,  previous,  up
+@node Getting Help
+@section Getting Help
 @cindex help
 
 @table @kbd
@@ -1234,8 +1206,7 @@ This key is bound to @code{describe-mode}.
 @comment ***                TAGS LIKE FUNCTIONS
 @comment **************************************************************
 
-@node Tags-like Functions, GNU Free Documentation License, Member Buffers, Top
-@comment  node-name,       next,       previous,      up
+@node Tags-like Functions
 @chapter Tags-like Functions
 
 Ebrowse provides tags functions similar to those of the standard
@@ -1254,8 +1225,7 @@ Emacs Tags facility, but better suited to the needs of C++ programmers.
 
 
 
-@node Finding and Viewing, Position Stack, Tags-like Functions, Tags-like Functions
-@comment  node-name,       next,       previous,      up
+@node Finding and Viewing
 @section Finding and Viewing Members
 @cindex finding class member, in C++ source
 @cindex viewing class member, in C++ source
@@ -1314,8 +1284,7 @@ View a member's declaration in another frame.
 
 
 
-@node Position Stack, Search & Replace, Finding and Viewing, Tags-like Functions
-@comment  node-name,       next,       previous,      up
+@node Position Stack
 @section The Position Stack
 @cindex position stack
 
@@ -1351,8 +1320,7 @@ view a position with @kbd{v}.
 
 
 
-@node Search & Replace, Members in Files, Position Stack, Tags-like Functions
-@comment  node-name,       next,       previous,      up
+@node Search & Replace
 @section Searching and Replacing
 @cindex searching multiple C++ files
 @cindex replacing in multiple C++ files
@@ -1389,8 +1357,7 @@ This restarts the last tags operation with the next file in the list.
 
 
 
-@node Members in Files, Apropos, Search & Replace, Tags-like Functions
-@comment  node-name,       next,       previous,      up
+@node Members in Files
 @section Members in Files
 @cindex files
 @cindex members in file, listing
@@ -1403,8 +1370,7 @@ name is read from the minibuffer with completion.
 
 
 
-@node Apropos, Symbol Completion, Members in Files, Tags-like Functions
-@comment  node-name,       next,       previous,      up
+@node Apropos
 @section Member Apropos
 @cindex apropos on class members
 @cindex members, matching regexp
@@ -1421,8 +1387,7 @@ command @kbd{C-c C-m f}, for example, to jump to a specific member.
 
 
 
-@node Symbol Completion, Member Buffer Display, Apropos, Tags-like Functions
-@comment  node-name,       next,       previous,      up
+@node Symbol Completion
 @section Symbol Completion
 @cindex completion
 @cindex symbol completion
@@ -1432,7 +1397,7 @@ The command @kbd{C-c C-m @key{TAB}} completes the symbol in front of point.
 
 
 
-@node Member Buffer Display, , Symbol Completion, Tags-like Functions
+@node Member Buffer Display
 @section Quick Member Display
 @cindex member buffer, for member at point
 
@@ -1440,12 +1405,12 @@ You can quickly display a member buffer containing the member the cursor
 in on with the command @kbd{C-c C-m m}.
 
 
-@node GNU Free Documentation License, Concept Index, Tags-like Functions, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
 
-@node Concept Index, , GNU Free Documentation License, Top
+@node Concept Index
 @unnumbered Concept Index
 @printindex cp
 
diff --git a/doc/misc/ediff.texi b/doc/misc/ediff.texi
index 1aba0a446f1..7a05c2bb14c 100644
--- a/doc/misc/ediff.texi
+++ b/doc/misc/ediff.texi
@@ -61,7 +61,7 @@ modify this GNU manual.''
 
 @contents
 
-@node Top, Introduction, (dir), (dir)
+@node Top
 @top Ediff
 
 @insertcopying
@@ -79,7 +79,7 @@ modify this GNU manual.''
 * Index::
 @end menu
 
-@node Introduction, Major Entry Points, Top, Top
+@node Introduction
 @chapter Introduction
 
 @cindex Comparing files and buffers
@@ -127,7 +127,7 @@ functions are adaptations from Emerge.  Although Ediff subsumes and greatly
 extends Emerge, much of the functionality in Ediff is influenced by Emerge.
 The architecture and the interface are, of course, drastically different.
 
-@node Major Entry Points, Session Commands, Introduction, Top
+@node Major Entry Points
 @chapter Major Entry Points
 
 When Ediff starts up, it displays a small control window, which accepts the
@@ -397,7 +397,7 @@ Moreover, the functions @code{ediff-directory-revisions},
 related Ediff sessions by taking a directory and comparing (or merging)
 versions of files in that directory.
 
-@node Session Commands, Registry of Ediff Sessions, Major Entry Points, Top
+@node Session Commands
 @chapter Session Commands
 
 All Ediff commands are displayed in a Quick Help window, unless you type
@@ -430,7 +430,7 @@ command (see @kbd{ga}, @kbd{gb}, and @kbd{gc}).
 * Other Session Commands::          Commands that are not bound to keys.
 @end menu
 
-@node Quick Help Commands,Other Session Commands,,Session Commands
+@node Quick Help Commands
 @section Quick Help Commands
 @cindex command help
 @cindex important commands
@@ -911,7 +911,7 @@ merge buffer and then select regions in those buffers.
 
 @end table
 
-@node Other Session Commands,,Quick Help Commands,Session Commands
+@node Other Session Commands
 @section Other Session Commands
 
 The following commands can be invoked from within any Ediff session,
@@ -977,7 +977,7 @@ making it run faster.  The function @code{ediff-profile} toggles
 profiling of ediff commands.
 @end table
 
-@node Registry of Ediff Sessions, Session Groups, Session Commands, Top
+@node Registry of Ediff Sessions
 @chapter Registry of Ediff Sessions
 
 Ediff maintains a registry of all its invocations that are
@@ -1008,7 +1008,7 @@ and @kbd{DEL} (previous registry record).  There are other commands as well,
 but you don't need to memorize them, since they are listed at the top of
 the registry buffer.
 
-@node Session Groups, Remote and Compressed Files, Registry of Ediff Sessions, Top
+@node Session Groups
 @chapter Session Groups
 
 Several major entries of Ediff perform comparison and merging on
@@ -1127,7 +1127,7 @@ user whether or not to do a recursive descent.
 
 
 
-@node Remote and Compressed Files, Customization, Session Groups, Top
+@node Remote and Compressed Files
 @chapter Remote and Compressed Files
 
 Ediff works with remote, compressed, and encrypted files.  Ediff
@@ -1150,7 +1150,7 @@ i.e., the original is renamed into @file{source-name.orig} and the result
 of the patch is placed into the file source-name (@file{_orig} is used
 on systems like DOS, etc.)
 
-@node Customization, Credits, Remote and Compressed Files, Top
+@node Customization
 @chapter Customization
 
 Ediff has a rather self-explanatory interface, and in most cases you
@@ -1186,7 +1186,7 @@ refer to Emacs manual for the information on how to set Emacs X resources.
 * Notes on Heavy-duty Customization::  Customization for the gurus.
 @end menu
 
-@node Hooks, Quick Help Customization, Customization, Customization
+@node Hooks
 @section Hooks
 
 The bulk of customization can be done via the following hooks:
@@ -1332,7 +1332,7 @@ map that controls key bindings in the meta buffer.  Since
 bindings for different kinds of meta buffers.
 @end table
 
-@node Quick Help Customization, Window and Frame Configuration, Hooks, Customization
+@node Quick Help Customization
 @section Quick Help Customization
 @vindex ediff-use-long-help-message
 @vindex ediff-control-buffer
@@ -1356,7 +1356,7 @@ basis, you must use @code{ediff-startup-hook} to change the value of
 the variable @code{ediff-help-message}, which is local to
 @code{ediff-control-buffer}.
 
-@node Window and Frame Configuration, Selective Browsing, Quick Help Customization, Customization
+@node Window and Frame Configuration
 @section Window and Frame Configuration
 
 On a non-windowing display, Ediff sets things up in one frame, splitting
@@ -1493,7 +1493,7 @@ can switch between sessions by suspending one session and then switching
 to another control panel.  (Different control panel buffers are
 distinguished by a numerical suffix, e.g., @samp{Ediff Control Panel<3>}.)
 
-@node Selective Browsing, Highlighting Difference Regions, Window and Frame Configuration, Customization
+@node Selective Browsing
 @section Selective Browsing
 
 Sometimes it is convenient to be able to step through only some difference
@@ -1608,7 +1608,7 @@ ignoring letter case or not. It can be set in @file{.emacs} using
 When case sensitivity is toggled, all difference
 regions are recomputed.
 
-@node Highlighting Difference Regions, Narrowing, Selective Browsing, Customization
+@node Highlighting Difference Regions
 @section Highlighting Difference Regions
 
 The following variables control the way Ediff highlights difference
@@ -1735,7 +1735,7 @@ faces, you can modify them when Ediff is being loaded using
 or @code{set/make-face-@dots{}} as shown above. Emacs's low-level
 face-manipulation functions should be avoided.
 
-@node Narrowing, Refinement of Difference Regions, Highlighting Difference Regions, Customization
+@node Narrowing
 @section Narrowing
 
 If buffers being compared are narrowed at the time of invocation of
@@ -1767,7 +1767,7 @@ Controls whether on quitting Ediff should restore the accessible range
 that existed before the current invocation.
 @end table
 
-@node Refinement of Difference Regions, Patch and Diff Programs, Narrowing, Customization
+@node Refinement of Difference Regions
 @section Refinement of Difference Regions
 
 Ediff has variables to control the way fine differences are
@@ -1839,7 +1839,7 @@ command @kbd{@@}.  Repeated typing of this key cycles through three
 different states: auto-refining, no-auto-refining, and no-highlighting
 of fine differences.
 
-@node Patch and Diff Programs, Merging and diff3, Refinement of Difference Regions, Customization
+@node Patch and Diff Programs
 @section Patch and Diff Programs
 
 This section describes variables that specify the programs to be used for
@@ -1948,7 +1948,7 @@ Specifies the default directory to look for patches.
 @code{diff}.  Instead, make sure you are using some implementation of POSIX
 @code{diff}, such as @code{gnudiff}.
 
-@node Merging and diff3, Support for Version Control, Patch and Diff Programs, Customization
+@node Merging and diff3
 @section Merging and diff3
 
 Ediff supports three-way comparison via the functions @code{ediff-files3} and
@@ -2152,7 +2152,7 @@ When merge buffers are saved automatically as directed by
 specified by the variable @code{ediff-merge-filename-prefix}. The default
 is @code{merge_}, but this can be changed by the user.
 
-@node Support for Version Control, Customizing the Mode Line, Merging and diff3, Customization
+@node Support for Version Control
 @section Support for Version Control
 
 
@@ -2197,7 +2197,7 @@ In case of @file{pcl-cvs.el}, Ediff can also be invoked via the function
 @code{run-ediff-from-cvs-buffer}---see the documentation string for this
 function.
 
-@node Customizing the Mode Line, Miscellaneous, Support for Version Control, Customization
+@node Customizing the Mode Line
 @section Customizing the Mode Line
 
 When Ediff is running, the mode line of @samp{Ediff Control Panel}
@@ -2216,7 +2216,7 @@ don't like the way Ediff changes the mode line, you can use
 @pindex @file{uniquify.el}
 @pindex @file{mode-line.el}
 
-@node Miscellaneous, Notes on Heavy-duty Customization, Customizing the Mode Line, Customization
+@node Miscellaneous
 @section Miscellaneous
 
 Here are a few other variables for customizing Ediff:
@@ -2333,7 +2333,7 @@ Try different settings and see which one is for you.
 @end table
 
 
-@node Notes on Heavy-duty Customization, , Miscellaneous, Customization
+@node Notes on Heavy-duty Customization
 @section Notes on Heavy-duty Customization
 
 Some users need to customize Ediff in rather sophisticated ways, which
@@ -2402,7 +2402,7 @@ non-@code{nil} only if Ediff uses the multiframe display, i.e., when
 the control buffer is in its own frame.
 @end table
 
-@node Credits, GNU Free Documentation License, Customization, Top
+@node Credits
 @chapter Credits
 
 Ediff was written by Michael Kifer <kifer@@cs.stonybrook.edu>.  It was inspired
@@ -2520,12 +2520,12 @@ Ilya Zakharevich (ilya at math.ohio-state.edu),
 Eli Zaretskii (eliz at is.elta.co.il)
 @end example
 
-@node GNU Free Documentation License, Index, Credits, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
 
-@node Index, , GNU Free Documentation License, Top
+@node Index
 @unnumbered Index
 @printindex cp
 
diff --git a/doc/misc/ert.texi b/doc/misc/ert.texi
index 4dd19613509..e6e50a9ae08 100644
--- a/doc/misc/ert.texi
+++ b/doc/misc/ert.texi
@@ -25,7 +25,7 @@ modify this GNU manual.''
 @end quotation
 @end copying
 
-@node Top, Introduction, (dir), (dir)
+@node Top
 @top ERT: Emacs Lisp Regression Testing
 
 ERT is a tool for automated testing in Emacs Lisp.  Its main features
@@ -86,7 +86,7 @@ Appendix
 @end detailmenu
 @end menu
 
-@node Introduction, How to Run Tests, Top, Top
+@node Introduction
 @chapter Introduction
 
 ERT allows you to define @emph{tests} in addition to functions,
@@ -154,7 +154,7 @@ test.  Tests should clean up even if they fail.  @xref{Tests and Their
 Environment}.
 
 
-@node  How to Run Tests, How to Write Tests, Introduction, Top
+@node  How to Run Tests
 @chapter How to Run Tests
 
 You can run tests either in the Emacs you are working in, or on the
@@ -172,7 +172,7 @@ different Emacs versions.
 @end menu
 
 
-@node Running Tests Interactively, Running Tests in Batch Mode, How to Run Tests, How to Run Tests
+@node Running Tests Interactively
 @section Running Tests Interactively
 
 You can run the tests that are currently defined in your Emacs with
@@ -251,7 +251,7 @@ while point is on a test failure will increase the limits to show more
 of the expression.
 
 
-@node Running Tests in Batch Mode, Test Selectors, Running Tests Interactively, How to Run Tests
+@node Running Tests in Batch Mode
 @section Running Tests in Batch Mode
 
 ERT supports automated invocations from the command line or from
@@ -275,7 +275,7 @@ additional @code{-L} flags to ensure that @code{my-tests.el} and all the
 files that it requires are on your @code{load-path}.
 
 
-@node Test Selectors,  , Running Tests in Batch Mode, How to Run Tests
+@node Test Selectors
 @section Test Selectors
 
 Functions like @code{ert} accept a @emph{test selector}, a Lisp
@@ -314,7 +314,7 @@ result in the last run, and tag-based selectors such as @code{(not
 @code{:causes-redisplay}.
 
 
-@node How to Write Tests, How to Debug Tests, How to Run Tests, Top
+@node How to Write Tests
 @chapter How to Write Tests
 
 ERT lets you define tests in the same way you define functions.  You
@@ -334,7 +334,7 @@ to find where a test was defined if the test was loaded from a file.
 * Useful Techniques::           Some examples.
 @end menu
 
-@node The @code{should} Macro, Expected Failures, How to Write Tests, How to Write Tests
+@node The @code{should} Macro
 @section The @code{should} Macro
 
 Test bodies can include arbitrary code; but to be useful, they need to
@@ -398,7 +398,7 @@ default.
 @code{should} reports.
 
 
-@node Expected Failures, Tests and Their Environment, The @code{should} Macro, How to Write Tests
+@node Expected Failures
 @section Expected Failures
 
 Some bugs are complicated to fix, or not very important, and are left as
@@ -451,7 +451,7 @@ versions, specific architectures, etc.:
 @end lisp
 
 
-@node Tests and Their Environment, Useful Techniques, Expected Failures, How to Write Tests
+@node Tests and Their Environment
 @section Tests and Their Environment
 
 The outcome of running a test should not depend on the current state
@@ -506,7 +506,7 @@ by calling the corresponding function directly, after binding the
 hook variables to nil.  This avoids the above problems.
 
 
-@node Useful Techniques,  , Tests and Their Environment, How to Write Tests
+@node Useful Techniques
 @section Useful Techniques when Writing Tests
 
 Testing simple functions that have no side effects and no dependencies
@@ -587,7 +587,7 @@ for testing.  Usually, this makes the interfaces easier to use as
 well.
 
 
-@node How to Debug Tests, Extending ERT, How to Write Tests, Top
+@node How to Debug Tests
 @chapter How to Debug Tests
 
 This section describes how to use ERT's features to understand why
@@ -600,7 +600,7 @@ a test failed.
 @end menu
 
 
-@node Understanding Explanations, Interactive Debugging, How to Debug Tests, How to Debug Tests
+@node Understanding Explanations
 @section Understanding Explanations
 
 Failed @code{should} forms are reported like this:
@@ -667,7 +667,7 @@ ERT only provides explanations for predicates that have an explanation
 function registered.  @xref{Defining Explanation Functions}.
 
 
-@node Interactive Debugging,  , Understanding Explanations, How to Debug Tests
+@node Interactive Debugging
 @section Interactive Debugging
 
 Debugging failed tests essentially works the same way as debugging any
@@ -712,7 +712,7 @@ forget about the obsolete test.
 @end itemize
 
 
-@node Extending ERT, Other Testing Concepts, How to Debug Tests, Top
+@node Extending ERT
 @chapter Extending ERT
 
 There are several ways to add functionality to ERT.
@@ -723,7 +723,7 @@ There are several ways to add functionality to ERT.
 @end menu
 
 
-@node Defining Explanation Functions, Low-Level Functions for Working with Tests, Extending ERT, Extending ERT
+@node Defining Explanation Functions
 @section Defining Explanation Functions
 
 The explanation function for a predicate is a function that takes the
@@ -741,7 +741,7 @@ The value of the property should be the symbol that names the
 explanation function.
 
 
-@node Low-Level Functions for Working with Tests,  , Defining Explanation Functions, Extending ERT
+@node Low-Level Functions for Working with Tests
 @section Low-Level Functions for Working with Tests
 
 Both @code{ert-run-tests-interactively} and @code{ert-run-tests-batch}
@@ -757,7 +757,7 @@ meant to be usable by other code.  But there is no mature API yet.
 Contributions to ERT are welcome.
 
 
-@node Other Testing Concepts, GNU Free Documentation License , Extending ERT, Top
+@node Other Testing Concepts
 @chapter Other Testing Concepts
 
 For information on mocks, stubs, fixtures, or test suites, see below.
@@ -768,7 +768,7 @@ For information on mocks, stubs, fixtures, or test suites, see below.
 * Fixtures and Test Suites::  How ERT differs from tools for other languages.
 @end menu
 
-@node Mocks and Stubs, Fixtures and Test Suites, Other Testing Concepts, Other Testing Concepts
+@node Mocks and Stubs
 @section Other Tools for Emacs Lisp
 
 Stubbing out functions or using so-called @emph{mocks} can make it
@@ -781,7 +781,7 @@ ERT does not have built-in support for mocks or stubs.  The package
 offers mocks for Emacs Lisp and can be used in conjunction with ERT.
 
 
-@node Fixtures and Test Suites,  , Mocks and Stubs, Other Testing Concepts
+@node Fixtures and Test Suites
 @section Fixtures and Test Suites
 
 In many ways, ERT is similar to frameworks for other languages like
@@ -840,7 +840,7 @@ e.g., to run quick tests during interactive development and slow tests less
 often.  This can be achieved with the @code{:tag} argument to
 @code{ert-deftest} and @code{tag} test selectors.
 
-@node GNU Free Documentation License, , Other Testing Concepts, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
diff --git a/doc/misc/eshell.texi b/doc/misc/eshell.texi
index 5011910033d..e9772e7ea8f 100644
--- a/doc/misc/eshell.texi
+++ b/doc/misc/eshell.texi
@@ -57,7 +57,7 @@ modify this GNU manual.''
 @c ================================================================
 
 @ifnottex
-@node Top, What is Eshell?, (dir), (dir)
+@node Top
 @top Eshell
 
 Eshell is a shell-like command interpreter
diff --git a/doc/misc/eudc.texi b/doc/misc/eudc.texi
index d5127cd3e09..25cab3982f4 100644
--- a/doc/misc/eudc.texi
+++ b/doc/misc/eudc.texi
@@ -48,9 +48,8 @@ modify this GNU manual.''
 @contents
 
 @ifnottex
-@node     Top, Overview, (dir), (dir)
+@node     Top
 @top Emacs Unified Directory Client
-@comment  node-name,  next,         previous, up
 
 @insertcopying
 @end ifnottex
@@ -69,8 +68,7 @@ modify this GNU manual.''
 
 
 
-@node     Overview, Installation, Top, Top
-@comment  node-name,   next,  previous,  up
+@node     Overview
 @chapter Overview
 
 EUDC, the @dfn{Emacs Unified Directory Client}, provides a common user
@@ -115,8 +113,7 @@ Interface to BBDB to let you insert server records into your own BBDB database
 
 
 
-@node LDAP, CCSO PH/QI, Overview, Overview
-@comment  node-name,  next,  previous,  up
+@node LDAP
 @section LDAP
 
 LDAP, @dfn{the Lightweight Directory Access Protocol}, is a communication
@@ -142,8 +139,7 @@ EUDC requires external support to access LDAP directory servers
 (@pxref{LDAP Requirements})
 
 
-@node CCSO PH/QI, BBDB, LDAP, Overview
-@comment  node-name,  next,  previous,  up
+@node CCSO PH/QI
 @section CCSO PH/QI
 
 The Central Computing Services Office (CCSO) of the University of
@@ -164,8 +160,7 @@ possible to change records in the database.  This is not implemented in
 EUDC.
 
 
-@node BBDB,  , CCSO PH/QI, Overview
-@comment  node-name,  next,  previous,  up
+@node BBDB
 @section BBDB
 
 BBDB is the @dfn{Big Brother's Insidious Database}, a package for Emacs
@@ -187,8 +182,7 @@ performing queries on multiple servers.
 EUDC also offers a means to insert results from directory queries into
 your own local BBDB (@pxref{Creating BBDB Records})
 
-@node Installation, Usage, Overview, Top
-@comment  node-name,  next,  previous,  up
+@node Installation
 @chapter Installation
 
 Add the following to your @file{.emacs} init file:
@@ -218,8 +212,7 @@ email composition buffers (@pxref{Inline Query Expansion})
 * LDAP Requirements::           EUDC needs external support for LDAP
 @end menu
 
-@node LDAP Requirements,  , Installation, Installation
-@comment  node-name,  next,  previous,  up
+@node LDAP Requirements
 @section LDAP Requirements
 
 LDAP support is added by means of @file{ldap.el}, which is part of Emacs.
@@ -228,8 +221,7 @@ LDAP support is added by means of @file{ldap.el}, which is part of Emacs.
 (@url{http://www.openldap.org/}).
 
 
-@node Usage, Credits, Installation, Top
-@comment  node-name,  next,  previous,  up
+@node Usage
 @chapter Usage
 
 This chapter describes the usage of EUDC@.  Most functions and
@@ -248,8 +240,7 @@ submenu of the @samp{Tools} submenu.
 @end menu
 
 
-@node Querying Servers, Query Form, Usage, Usage
-@comment  node-name,  next,  previous,  up
+@node Querying Servers
 @section Querying Servers
 
 EUDC's basic functionality is to let you query a directory server and
@@ -263,7 +254,7 @@ to customize in this process.
 * Duplicate Attributes::        What to do when records have duplicate attributes
 @end menu
 
-@node Selecting a Server, Return Attributes, Querying Servers, Querying Servers
+@node Selecting a Server
 @subsection Selecting a Server
 
 Before doing any query you will need to set the directory server.  You
@@ -302,7 +293,7 @@ This command accessible from @samp{New Server} submenu lets you specify a
 new directory server and protocol.
 @end deffn
 
-@node Return Attributes, Duplicate Attributes, Selecting a Server, Querying Servers
+@node Return Attributes
 @subsection Return Attributes
 
 Directory servers may be configured to return a default set of
@@ -326,7 +317,7 @@ If non-@code{nil}, entries that do not contain all the requested return
 attributes are ignored.  Default is @code{t}.
 @end defopt
 
-@node Duplicate Attributes,  , Return Attributes, Querying Servers
+@node Duplicate Attributes
 @subsection Duplicate Attributes
 
 Directory standards may authorize different instances of the same
@@ -381,8 +372,7 @@ to all attribute names. Available methods are: @code{list},
 
 
 
-@node Query Form, Display of Query Results, Querying Servers, Usage
-@comment  node-name,  next,  previous,  up
+@node Query Form
 @section Query Form
 
 The simplest way to query your directory server is to use the query
@@ -436,8 +426,7 @@ Otherwise, directory query/response forms display the user attribute
 names defined in @code{eudc-user-attribute-names-alist}.
 @end defvar
 
-@node Display of Query Results, Inline Query Expansion, Query Form, Usage
-@comment  node-name,  next,  previous,  up
+@node Display of Query Results
 @section Display of Query Results
 
 Upon successful completion of a form query, EUDC will display a buffer
@@ -514,8 +503,7 @@ be passed to the program.
 @end defvar
 
 
-@node Inline Query Expansion, The Server Hotlist, Display of Query Results, Usage
-@comment  node-name,  next,  previous,  up
+@node Inline Query Expansion
 @section Inline Query Expansion
 
 Inline query expansion is a powerful method to get completion from your
@@ -615,8 +603,7 @@ Default is @code{select}
 
 
 
-@node The Server Hotlist, Multi-server Queries, Inline Query Expansion, Usage
-@comment  node-name,  next,  previous,  up
+@node The Server Hotlist
 @section The Server Hotlist
 
 EUDC lets you maintain a list of frequently used servers so that you
@@ -654,8 +641,7 @@ loaded.
 * The Hotlist Edit Buffer::     An interactive hotlist editing facility
 @end menu
 
-@node The Hotlist Edit Buffer,  , The Server Hotlist, The Server Hotlist
-@comment  node-name,  next,  previous,  up
+@node The Hotlist Edit Buffer
 @subsection The Hotlist Edit Buffer
 
 The hotlist edit buffer offers a means to manage a list of frequently
@@ -691,8 +677,7 @@ Save the changes and quit the hotlist edit buffer.  Use @kbd{x} or
 @end deffn
 
 
-@node Multi-server Queries, Creating BBDB Records, The Server Hotlist, Usage
-@comment  node-name,  next,  previous,  up
+@node Multi-server Queries
 @section Multi-server Queries
 
 When using inline query expansion (@pxref{Inline Query Expansion}), EUDC
@@ -723,8 +708,7 @@ that all available servers should be tried.
 
 
 
-@node Creating BBDB Records, Server/Protocol Locals, Multi-server Queries, Usage
-@comment  node-name,  next,  previous,  up
+@node Creating BBDB Records
 @section Creating BBDB Records
 
 @findex eudc-insert-record-at-point-into-bbdb
@@ -839,8 +823,7 @@ Note that only a subset of the attributes you selected with
 actually be inserted as part of the newly created BBDB record.
 
 
-@node Server/Protocol Locals,  , Creating BBDB Records, Usage
-@comment  node-name,  next,  previous,  up
+@node Server/Protocol Locals
 @section Server/Protocol Locals
 
 EUDC can be customized independently for each server or directory
@@ -852,8 +835,7 @@ like buffer-local bindings but on a per server or per protocol basis.
 * Manipulating local bindings::  Functions to set and query local bindings
 @end menu
 
-@node Manipulating local bindings,  , Server/Protocol Locals, Server/Protocol Locals
-@comment  node-name,  next,  previous,  up
+@node Manipulating local bindings
 @subsection Manipulating local bindings
 
 EUDC offers functions that let you set and query variables on a per
@@ -930,8 +912,7 @@ Update all EUDC variables according to their local settings.
 
 
 
-@node Credits, GNU Free Documentation License, Usage, Top
-@comment  node-name,  next,  previous,  up
+@node Credits
 @chapter Credits
 
 EUDC was written by Oscar Figueiredo based on @file{ph.el} by the
@@ -940,18 +921,16 @@ same author.
 Thanks to Soren Dayton for his suggestions, his enthusiasm and his help
 in testing and proofreading the code and docs of @file{ph.el}.
 
-@node GNU Free Documentation License, Command and Function Index, Credits, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
-@node Command and Function Index, Variables Index, GNU Free Documentation License, Top
-@comment  node-name,  next,  previous,  up
+@node Command and Function Index
 @unnumbered Command and Function Index
 
 @printindex fn
 
-@node Variables Index,  , Command and Function Index, Top
-@comment  node-name,  next,  previous,  up
+@node Variables Index
 @unnumbered Variables Index
 
 @printindex vr
diff --git a/doc/misc/idlwave.texi b/doc/misc/idlwave.texi
index c9ada95cd00..eb1820b2bfd 100644
--- a/doc/misc/idlwave.texi
+++ b/doc/misc/idlwave.texi
@@ -55,7 +55,7 @@ modify this GNU manual.''
 @contents
 
 @ifnottex
-@node Top, Introduction, (dir), (dir)
+@node Top
 @top IDLWAVE
 
 IDLWAVE is a package which supports editing source code written in the
@@ -165,7 +165,7 @@ Catalogs
 @end detailmenu
 @end menu
 
-@node Introduction, IDLWAVE in a Nutshell, Top, Top
+@node Introduction
 @chapter Introduction
 @cindex Introduction
 @cindex CORBA (Common Object Request Broker Architecture)
@@ -271,7 +271,7 @@ configure it, see the documentation string of that variable (available
 with @kbd{C-h v}).  Some configuration examples are also given in the
 appendix.
 
-@node IDLWAVE in a Nutshell, Getting Started, Introduction, Top
+@node IDLWAVE in a Nutshell
 @chapter IDLWAVE in a Nutshell
 @cindex Summary of important commands
 @cindex IDLWAVE in a Nutshell
@@ -365,7 +365,7 @@ at point.
 <A NAME="TUTORIAL"></A>
 @end html
 
-@node Getting Started, The IDLWAVE Major Mode, IDLWAVE in a Nutshell, Top
+@node Getting Started
 @chapter Getting Started (Tutorial)
 @cindex Quick-Start
 @cindex Tutorial
@@ -377,7 +377,7 @@ at point.
 * Lesson III---User Catalog::
 @end menu
 
-@node  Lesson I---Development Cycle, Lesson II---Customization, Getting Started, Getting Started
+@node  Lesson I---Development Cycle
 @section Lesson I: Development Cycle
 
 The purpose of this tutorial is to guide you through a very basic
@@ -551,7 +551,7 @@ command.  Everything should now work fine.  How about those leap years?
 Change the code to plot 100 years and see that every 28 years, the
 sequence of weekdays repeats.
 
-@node  Lesson II---Customization, Lesson III---User Catalog, Lesson I---Development Cycle, Getting Started
+@node  Lesson II---Customization
 @section Lesson II: Customization
 
 Emacs is probably the most customizable piece of software ever written,
@@ -661,7 +661,7 @@ endless.  Here we set function keys f4-f8 to common debugging commands.
     (local-set-key [f8] 'idlwave-shell-clear-all-bp)))
 @end lisp
 
-@node  Lesson III---User Catalog,  , Lesson II---Customization, Getting Started
+@node  Lesson III---User Catalog
 @section Lesson III: User and Library Catalogs
 
 We have already used the routine info display in the first part of this
@@ -721,7 +721,7 @@ the manual, look at the documentation strings of interesting variables
 (with @kbd{C-h v idlwave<-variable-name> @key{RET}}) and ask the
 remaining questions on the newsgroup @code{comp.lang.idl-pvwave}.
 
-@node The IDLWAVE Major Mode, The IDLWAVE Shell, Getting Started, Top
+@node The IDLWAVE Major Mode
 @chapter The IDLWAVE Major Mode
 @cindex IDLWAVE major mode
 @cindex Major mode, @code{idlwave-mode}
@@ -745,7 +745,7 @@ them.
 * Misc Options::                Things that fit nowhere else
 @end menu
 
-@node Code Formatting, Routine Info, The IDLWAVE Major Mode, The IDLWAVE Major Mode
+@node Code Formatting
 @section Code Formatting
 @cindex Code formatting
 @cindex Formatting, of code
@@ -773,7 +773,7 @@ you.  After configuring it to match your coding standards, you can
 rely on it to help keep your code neat and organized.
 
 
-@node Code Indentation, Continued Statement Indentation, Code Formatting, Code Formatting
+@node Code Indentation
 @subsection Code Indentation
 @cindex Code indentation
 @cindex Indentation
@@ -813,7 +813,7 @@ Extra indentation applied to block END lines.  A value equal to negative
 BEGIN lines.
 @end defopt
 
-@node Continued Statement Indentation, Comment Indentation, Code Indentation, Code Formatting
+@node Continued Statement Indentation
 @subsection Continued Statement Indentation
 @cindex Indentation, continued statement
 @cindex Continued statement indentation
@@ -887,7 +887,7 @@ parenthesis, regardless of whether the
 @code{idlwave-max-extra-continuation-indent} limit is satisfied.
 @end defopt
 
-@node Comment Indentation, Continuation Lines, Continued Statement Indentation, Code Formatting
+@node Comment Indentation
 @subsection Comment Indentation
 @cindex Comment indentation
 @cindex Hanging paragraphs
@@ -924,7 +924,7 @@ A comment that starts with this regexp is indented as if it is a part of
 IDL code.
 @end defopt
 
-@node Continuation Lines, Syntax Highlighting, Comment Indentation, Code Formatting
+@node Continuation Lines
 @subsection Continuation Lines and Filling
 @cindex Continuation lines
 @cindex Line splitting
@@ -1000,7 +1000,7 @@ Non-@code{nil} means use last match on line for
 @code{idlwave-indent-regexp}.
 @end defopt
 
-@node Syntax Highlighting, Octals and Highlighting, Continuation Lines, Code Formatting
+@node Syntax Highlighting
 @subsection Syntax Highlighting
 @cindex Syntax highlighting
 @cindex Highlighting of syntax
@@ -1028,7 +1028,7 @@ Items which should be fontified on the default fontification level
 2.
 @end defopt
 
-@node Octals and Highlighting,  , Syntax Highlighting, Code Formatting
+@node Octals and Highlighting
 @subsection Octals and Highlighting
 @cindex Syntax highlighting, Octals
 @cindex Highlighting of syntax, Octals
@@ -1058,7 +1058,7 @@ altogether, and use the more sensible alternative IDL provides:
 @noindent This simultaneously solves the font-lock problem and is more
 consistent with the notation for hexadecimal numbers, e.g., @code{'C5'XB}.
 
-@node Routine Info, Online Help, Code Formatting, The IDLWAVE Major Mode
+@node Routine Info
 @section Routine Info
 @cindex Routine info
 @cindex Updating routine info
@@ -1236,7 +1236,7 @@ Maximum number of source files displayed in the Routine Info window.
 @html
 <A NAME="ONLINE_HELP"></A>
 @end html
-@node Online Help, Completion, Routine Info, The IDLWAVE Major Mode
+@node Online Help
 @section Online Help
 
 @cindex Online Help
@@ -1343,7 +1343,7 @@ directly in the originating source file.
 * Help with Source::
 @end menu
 
-@node Help with HTML Documentation, Help with Source, Online Help, Online Help
+@node Help with HTML Documentation
 @subsection Help with HTML Documentation
 @cindex HTML Help
 @cindex Help using HTML manuals
@@ -1422,7 +1422,7 @@ contains "-w3".
 The face for links to IDLWAVE online help.
 @end defopt
 
-@node Help with Source,  , Help with HTML Documentation, Online Help
+@node Help with Source
 @subsection Help with Source
 @cindex Help using routine source
 
@@ -1509,7 +1509,7 @@ The case-insensitive heading word in doclib headers to locate the
 @end defopt
 
 
-@node Completion, Routine Source, Online Help, The IDLWAVE Major Mode
+@node Completion
 @section Completion
 @cindex Completion
 @cindex Keyword completion
@@ -1617,7 +1617,7 @@ available.
 * Structure Tag Completion::    Completing state.Tag
 @end menu
 
-@node  Case of Completed Words, Object Method Completion and Class Ambiguity, Completion, Completion
+@node  Case of Completed Words
 @subsection Case of Completed Words
 @cindex Case of completed words
 @cindex Mixed case completion
@@ -1654,7 +1654,7 @@ Non-@code{nil} means the empty string is considered lower case for
 completion.
 @end defopt
 
-@node  Object Method Completion and Class Ambiguity, Object Method Completion in the Shell, Case of Completed Words, Completion
+@node  Object Method Completion and Class Ambiguity
 @subsection Object Method Completion and Class Ambiguity
 @cindex Object methods
 @cindex Class ambiguity
@@ -1717,7 +1717,7 @@ Face to highlight object operator arrows @samp{->} which carry a saved
 class text property.
 @end defopt
 
-@node Object Method Completion in the Shell, Class and Keyword Inheritance, Object Method Completion and Class Ambiguity, Completion
+@node Object Method Completion in the Shell
 @subsection Object Method Completion in the Shell
 @cindex Method Completion in Shell
 In the IDLWAVE Shell (@pxref{The IDLWAVE Shell}), objects on which
@@ -1730,7 +1730,7 @@ class found will be used to select appropriate completions, routine
 info, or help.  If unsuccessful, information from all known classes will
 be used (as in the buffer).
 
-@node   Class and Keyword Inheritance, Structure Tag Completion, Object Method Completion in the Shell, Completion
+@node   Class and Keyword Inheritance
 @subsection Class and Keyword Inheritance
 @cindex Inheritance, class
 @cindex Keyword inheritance
@@ -1776,7 +1776,7 @@ A list of regular expressions to match methods for which simple
 class-driven keyword inheritance will be used for Completion.
 @end defopt
 
-@node    Structure Tag Completion,  , Class and Keyword Inheritance, Completion
+@node    Structure Tag Completion
 @subsection Structure Tag Completion
 @cindex Completion, structure tag
 @cindex Structure tag completion
@@ -1818,7 +1818,7 @@ IDL> st.[Tab]
 @noindent will complete with all structure fields of the structure
 @code{st}.
 
-@node Routine Source, Resolving Routines, Completion, The IDLWAVE Major Mode
+@node Routine Source
 @section Routine Source
 @cindex Routine source file
 @cindex Module source file
@@ -1844,7 +1844,7 @@ sometimes created.  The special command @kbd{C-c C-k}
 (@code{idlwave-kill-autoloaded-buffers}) can be used to easily remove
 these buffers.
 
-@node Resolving Routines, Code Templates, Routine Source, The IDLWAVE Major Mode
+@node Resolving Routines
 @section Resolving Routines
 @cindex @code{RESOLVE_ROUTINE}
 @cindex Compiling library modules
@@ -1865,7 +1865,7 @@ compile the modules first, and even without a running shell.
 @xref{Sources of Routine Info}, for more information on the ways IDLWAVE
 collects data about routines, and how to update this information.
 
-@node Code Templates, Abbreviations, Resolving Routines, The IDLWAVE Major Mode
+@node Code Templates
 @section Code Templates
 @cindex Code templates
 @cindex Templates
@@ -1887,7 +1887,7 @@ templates, this is done with direct key bindings:
 All code templates are also available as abbreviations
 (@pxref{Abbreviations}).
 
-@node Abbreviations, Actions, Code Templates, The IDLWAVE Major Mode
+@node Abbreviations
 @section Abbreviations
 @cindex Abbreviations
 
@@ -2073,7 +2073,7 @@ Non-@code{nil} means the abbrev hook can move point, e.g., to end up
 between the parentheses of a function call.
 @end defopt
 
-@node Actions, Doc Header, Abbreviations, The IDLWAVE Major Mode
+@node Actions
 @section Actions
 @cindex Actions
 @cindex Coding standards, enforcing
@@ -2121,7 +2121,7 @@ settings are described below and set separately.
 * Case Changes::                Enforcing upper case keywords
 @end menu
 
-@node Block Boundary Check, Padding Operators, Actions, Actions
+@node Block Boundary Check
 @subsection Block Boundary Check
 @cindex Block boundary check
 @cindex @code{END} type checking
@@ -2154,7 +2154,7 @@ Non-@code{nil} means expand generic END to ENDIF/ENDELSE/ENDWHILE etc.
 Non-@code{nil} means re-indent line after END was typed.
 @end defopt
 
-@node Padding Operators, Case Changes, Block Boundary Check, Actions
+@node Padding Operators
 @subsection Padding Operators
 @cindex Padding operators with spaces
 @cindex Operators, padding with spaces
@@ -2203,7 +2203,7 @@ surrounded with spaces by @code{idlwave-surround}.
 Non-@code{nil} means space-pad the @samp{=} in keyword assignments.
 @end defopt
 
-@node Case Changes,  , Padding Operators, Actions
+@node Case Changes
 @subsection Case Changes
 @cindex Case changes
 @cindex Upcase, enforcing for reserved words
@@ -2245,7 +2245,7 @@ expansion.
 @end defopt
 
 
-@node Doc Header, Motion Commands, Actions, The IDLWAVE Major Mode
+@node Doc Header
 @section Documentation Header
 @cindex Documentation header
 @cindex DocLib header
@@ -2289,7 +2289,7 @@ Regexp matching the start of a document library header.
 Regexp matching the start of a document library header.
 @end defopt
 
-@node Motion Commands, Misc Options, Doc Header, The IDLWAVE Major Mode
+@node Motion Commands
 @section Motion Commands
 @cindex Motion commands
 @cindex Program structure, moving through
@@ -2339,7 +2339,7 @@ IDL program:
 @end multitable
 
 
-@node Misc Options,  , Motion Commands, The IDLWAVE Major Mode
+@node Misc Options
 @section Miscellaneous Options
 @cindex Hooks
 
@@ -2360,7 +2360,7 @@ Normal hook.  Executed when a buffer is put into @code{idlwave-mode}.
 Normal hook.  Executed when @file{idlwave.el} is loaded.
 @end defopt
 
-@node The IDLWAVE Shell, Acknowledgments, The IDLWAVE Major Mode, Top
+@node The IDLWAVE Shell
 @chapter The IDLWAVE Shell
 @cindex IDLWAVE shell
 @cindex Major mode, @code{idlwave-shell-mode}
@@ -2389,7 +2389,7 @@ currently only works under Unix and MacOSX.
 * Custom Expression Examination::
 @end menu
 
-@node Starting the Shell, Using the Shell, The IDLWAVE Shell, The IDLWAVE Shell
+@node Starting the Shell
 @section Starting the Shell
 @cindex Starting the shell
 @cindex Shell, starting
@@ -2499,7 +2499,7 @@ The prefix for temporary IDL files used when compiling regions.
 Hook for customizing @code{idlwave-shell-mode}.
 @end defopt
 
-@node Using the Shell, Commands Sent to the Shell, Starting the Shell, The IDLWAVE Shell
+@node Using the Shell
 @section Using the Shell
 @cindex Comint
 @cindex Shell, basic commands
@@ -2626,7 +2626,7 @@ The three regular expressions which match the magic spells for input
 modes.
 @end defopt
 
-@node Commands Sent to the Shell, Debugging IDL Programs, Using the Shell, The IDLWAVE Shell
+@node Commands Sent to the Shell
 @section Commands Sent to the Shell
 @cindex Commands in shell, showing
 @cindex Showing commands in shell
@@ -2667,7 +2667,7 @@ As a special case, any error message in the output will be displayed
 (e.g., stepping to an error).
 @end defopt
 
-@node Debugging IDL Programs, Examining Variables, Commands Sent to the Shell, The IDLWAVE Shell
+@node Debugging IDL Programs
 @section Debugging IDL Programs
 @cindex Debugging
 @cindex Keybindings for debugging
@@ -2705,7 +2705,7 @@ buffers.
 @end menu
 
 
-@node A Tale of Two Modes, Debug Key Bindings, Debugging IDL Programs, Debugging IDL Programs
+@node A Tale of Two Modes
 @subsection A Tale of Two Modes
 @cindex Electric Debug Mode
 @cindex Debugging Interface
@@ -2725,7 +2725,7 @@ Mode}, for more on that mode.  Note that electric debug mode can be
 prevented from activating automatically by customizing the variable
 @code{idlwave-shell-automatic-electric-debug}.
 
-@node Debug Key Bindings, Breakpoints and Stepping, A Tale of Two Modes, Debugging IDL Programs
+@node Debug Key Bindings
 @subsection Debug Key Bindings
 @kindex C-c C-d
 @cindex Key bindings
@@ -2771,7 +2771,7 @@ more of @code{control}, @code{meta}, @code{super}, @code{hyper},
 @code{alt}, and @code{shift}.
 @end defopt
 
-@node Breakpoints and Stepping, Compiling Programs, Debug Key Bindings, Debugging IDL Programs
+@node Breakpoints and Stepping
 @subsection Breakpoints and Stepping
 @cindex Breakpoints
 @cindex Stepping
@@ -2903,7 +2903,7 @@ configured in @code{idlwave-shell-mark-stop-line}.
 @end defopt
 
 
-@node Compiling Programs, Walking the Calling Stack, Breakpoints and Stepping, Debugging IDL Programs
+@node Compiling Programs
 @subsection Compiling Programs
 @cindex Compiling programs
 @cindex Programs, compiling
@@ -2936,7 +2936,7 @@ level program @kbd{C-c C-d C-e} (@code{idlwave-shell-run-region}) is
 very useful.  A temporary file is created holding the contents of the
 current region (with @code{END} appended), and run from the shell.
 
-@node Walking the Calling Stack, Electric Debug Mode, Compiling Programs, Debugging IDL Programs
+@node Walking the Calling Stack
 @subsection Walking the Calling Stack
 @cindex Calling stack, walking
 
@@ -2958,7 +2958,7 @@ higher calling stack levels.
 @html
 <A NAME="EDEBUG"></A>
 @end html
-@node Electric Debug Mode,  , Walking the Calling Stack, Debugging IDL Programs
+@node Electric Debug Mode
 @subsection Electric Debug Mode
 @cindex Electric Debug Mode
 @cindex @samp{*Debugging*}
@@ -3095,7 +3095,7 @@ window, but is useful for immediate stepping, etc.
 @html
 <A NAME="EXAMINE"></A>
 @end html
-@node Examining Variables, Custom Expression Examination, Debugging IDL Programs, The IDLWAVE Shell
+@node Examining Variables
 @section Examining Variables
 @cindex @code{PRINT} expressions
 @cindex @code{HELP}, on expressions
@@ -3202,7 +3202,7 @@ The maximum number of leading array entries to print, when examining
 array expressions.
 @end defopt
 
-@node Custom Expression Examination,  , Examining Variables, The IDLWAVE Shell
+@node Custom Expression Examination
 @section Custom Expression Examination
 @cindex Expressions, custom examination
 @cindex Custom expression examination
@@ -3272,7 +3272,7 @@ examine command strings to send, after all instances of @code{___}
 (three underscores) are replaced by the indicated expression.
 @end defopt
 
-@node Acknowledgments, Sources of Routine Info, The IDLWAVE Shell, Top
+@node Acknowledgments
 @chapter Acknowledgments
 @cindex Acknowledgments
 @cindex Maintainer, of IDLWAVE
@@ -3351,7 +3351,7 @@ scripts and documentation to interface with the IDL Assistant.
 @noindent
 Thanks to everyone!
 
-@node Sources of Routine Info, HTML Help Browser Tips, Acknowledgments, Top
+@node Sources of Routine Info
 @appendix Sources of Routine Info
 
 @cindex Sources of routine information
@@ -3368,7 +3368,7 @@ know about the accessible routines.
 * Documentation Scan::          Scanning the IDL Manuals
 @end menu
 
-@node Routine Definitions, Routine Information Sources, Sources of Routine Info, Sources of Routine Info
+@node Routine Definitions
 @appendixsec Routine Definitions
 @cindex Routine definitions
 @cindex IDL variable @code{!PATH}
@@ -3404,7 +3404,7 @@ cannot provide routine info and completion for such external routines,
 except by querying the Shell for calling information (DLMs only).
 @end enumerate
 
-@node Routine Information Sources, Catalogs, Routine Definitions, Sources of Routine Info
+@node Routine Information Sources
 @appendixsec Routine Information Sources
 @cindex Routine info sources
 @cindex Builtin list of routines
@@ -3491,7 +3491,7 @@ Controls under what circumstances routine info is updated automatically.
 @html
 <A NAME="CATALOGS"></A>
 @end html
-@node Catalogs, Load-Path Shadows, Routine Information Sources, Sources of Routine Info
+@node Catalogs
 @appendixsec Catalogs
 @cindex Catalogs
 
@@ -3553,7 +3553,7 @@ later).
 @html
 <A NAME="LIBRARY_CATALOGS"></A>
 @end html
-@node Library Catalogs, User Catalog, Catalogs, Catalogs
+@node Library Catalogs
 @appendixsubsec Library Catalogs
 @cindex @file{.idlwave_catalog}
 @cindex Library catalogs
@@ -3617,7 +3617,7 @@ Whether to search for and load library catalogs.  Disable if load
 performance is a problem and/or the catalogs are not needed.
 @end defopt
 
-@node User Catalog,  , Library Catalogs, Catalogs
+@node User Catalog
 @appendixsubsec User Catalog
 @cindex User catalog
 @cindex IDL library routine info
@@ -3690,7 +3690,7 @@ Alist of regular expressions matching special library directories for
 labeling in routine-info display.
 @end defopt
 
-@node Load-Path Shadows, Documentation Scan, Catalogs, Sources of Routine Info
+@node Load-Path Shadows
 @appendixsec Load-Path Shadows
 @cindex Load-path shadows
 @cindex Shadows, load-path
@@ -3750,7 +3750,7 @@ routines.
 Another way to find out if a specific routine has multiple definitions
 on the load path is routine info display (@pxref{Routine Info}).
 
-@node Documentation Scan,  , Load-Path Shadows, Sources of Routine Info
+@node Documentation Scan
 @appendixsec Documentation Scan
 @cindex @file{get_html_rinfo}
 @cindex @file{idlw-rinfo.el}
@@ -3783,7 +3783,7 @@ scanning the HTML documents produced from the IDL documentation.
 Instructions on how to use @file{get_html_rinfo} are in the program
 itself.
 
-@node HTML Help Browser Tips, Configuration Examples, Sources of Routine Info, Top
+@node HTML Help Browser Tips
 @appendix HTML Help Browser Tips
 @cindex Browser Tips
 
@@ -3858,7 +3858,7 @@ Note that you can open the file in an external browser from within
 @code{w3m} using @kbd{M}.
 @end itemize
 
-@node Configuration Examples, Windows and MacOS, HTML Help Browser Tips, Top
+@node Configuration Examples
 @appendix Configuration Examples
 @cindex Configuration examples
 @cindex Example configuration
@@ -4021,7 +4021,7 @@ user is King!
 @html
 <A NAME="WINDOWS_MAC"></A>
 @end html
-@node Windows and MacOS, Troubleshooting, Configuration Examples, Top
+@node Windows and MacOS
 @appendix Windows and MacOS
 @cindex Windows
 @cindex MacOS
@@ -4079,7 +4079,7 @@ help can skip the browser and use the HTMLHelp functionality directly.
 @html
 <A NAME="TROUBLE"></A>
 @end html
-@node Troubleshooting, GNU Free Documentation License, Windows and MacOS, Top
+@node Troubleshooting
 @appendix Troubleshooting
 @cindex Troubleshooting
 
@@ -4285,11 +4285,11 @@ IDLWAVE is @samp{fsf-compat, xemacs-base, mail-lib}.
 
 @end enumerate
 
-@node GNU Free Documentation License, Index, Troubleshooting, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
-@node Index,  , GNU Free Documentation License, Top
+@node Index
 @unnumbered Index
 @printindex cp
 
diff --git a/doc/misc/rcirc.texi b/doc/misc/rcirc.texi
index c2ed68a0be0..b14195bb60b 100644
--- a/doc/misc/rcirc.texi
+++ b/doc/misc/rcirc.texi
@@ -35,7 +35,7 @@ modify this GNU manual.''
 @contents
 
 @ifnottex
-@node Top, Basics, (dir), (dir)
+@node Top
 @top rcirc Manual
 
 @code{rcirc} is an Emacs IRC client.
@@ -92,7 +92,7 @@ Hacking and Tweaking
 @end detailmenu
 @end menu
 
-@node Basics, Reference, Top, Top
+@node Basics
 @chapter Basics
 
 This chapter contains a brief introduction to IRC (Internet Relay Chat),
@@ -103,7 +103,7 @@ and a quick tutorial on @code{rcirc}.
 * Getting started with rcirc::
 @end menu
 
-@node Internet Relay Chat, Getting started with rcirc, Basics, Basics
+@node Internet Relay Chat
 @section Internet Relay Chat
 @cindex internet relay chat
 @cindex irc
@@ -156,7 +156,7 @@ deego: fsbot rules!
 @kindex TAB
 Since this is so common, you can use @key{TAB} to do nick completion.
 
-@node Getting started with rcirc, , Internet Relay Chat, Basics
+@node Getting started with rcirc
 @section Getting started with rcirc
 @cindex getting started
 @cindex connecting to a server
@@ -245,7 +245,7 @@ To make this permanent, add the following to your init file:
 
 Use @kbd{C-c C-@key{SPC}} to switch to these buffers.
 
-@node Reference, Fighting Information Overload, Basics, Top
+@node Reference
 @chapter Reference
 @cindex reference
 
@@ -259,7 +259,7 @@ documentation.
 * Configuration::
 @end menu
 
-@node rcirc commands, Useful IRC commands, Reference, Reference
+@node rcirc commands
 @section rcirc commands
 @cindex rcirc commands
 @cindex commands
@@ -402,7 +402,7 @@ buffer, you automatically quit the server and part all channels.  (Also
 @code{/quit ZZZzzz...}.)
 @end table
 
-@node Useful IRC commands, Configuration, rcirc commands, Reference
+@node Useful IRC commands
 @section Useful IRC commands
 @cindex irc commands
 @cindex commands
@@ -430,7 +430,7 @@ about the fantastic world of IRC online at
 @uref{http://www.irchelp.org/, the Internet Relay Chat (IRC) help
 archive}.
 
-@node Configuration, , Useful IRC commands, Reference
+@node Configuration
 @section Configuration
 @cindex configuring rcirc
 
@@ -594,7 +594,7 @@ confuse the Bitlbee account with all the other accounts.
 
 @end table
 
-@node Fighting Information Overload, Hacking and Tweaking, Reference, Top
+@node Fighting Information Overload
 @chapter Fighting Information Overload
 @cindex information overload
 
@@ -610,7 +610,7 @@ daunting task.  This chapters tells you how @code{rcirc} can help.
 * Notices::
 @end menu
 
-@node Channels, People, Fighting Information Overload, Fighting Information Overload
+@node Channels
 @section Channels
 @cindex channels
 @cindex modeline
@@ -668,7 +668,7 @@ If you prefer a channel to never show up in the modeline, then you
 have to ignore it.  Use @kbd{C-c @key{TAB}} to ignore the current
 channel.
 
-@node People, Keywords, Channels, Fighting Information Overload
+@node People
 @section People
 @cindex people, how to ignore
 @cindex nicks, how to ignore
@@ -726,7 +726,7 @@ messages by dimmed nicks will not register as activity.  Example:
 @end table
 
 
-@node Keywords, Notices, People, Fighting Information Overload
+@node Keywords
 @section Keywords
 @cindex keywords
 
@@ -742,7 +742,7 @@ one.  If you don't provide a keyword, the current keywords are
 listed.  Example: @code{/keyword manual}.
 @end table
 
-@node Notices, , Keywords, Fighting Information Overload
+@node Notices
 @section Notices
 @cindex part notices, how to omit
 @cindex join notices, how to omit
@@ -774,7 +774,7 @@ active and only omits a message if the nick has not been active.  The
 window @code{rcirc} considers is controlled by the
 @code{rcirc-omit-threshold} variable.
 
-@node Hacking and Tweaking, GNU Free Documentation License, Fighting Information Overload, Top
+@node Hacking and Tweaking
 @chapter Hacking and Tweaking
 @cindex hacking and tweaking
 
@@ -789,7 +789,7 @@ Here are some examples of stuff you can do to configure @code{rcirc}.
 * Reconnecting after you have lost the connection::
 @end menu
 
-@node Skipping /away messages using handlers, Using fly spell mode, Hacking and Tweaking, Hacking and Tweaking
+@node Skipping /away messages using handlers
 @section Skipping @code{/away} messages using handlers
 @cindex /away messages
 
@@ -809,7 +809,7 @@ require @code{rcirc} before defining the handler:
   "/away message handler.")
 @end example
 
-@node Using fly spell mode, Scrolling conservatively, Skipping /away messages using handlers, Hacking and Tweaking
+@node Using fly spell mode
 @section Using fly spell mode
 @cindex fly spell
 @cindex spelling
@@ -828,7 +828,7 @@ for @code{rcirc} buffers:
 @xref{Spelling, , Flyspell mode, emacs, The GNU Emacs Manual},
 for details.
 
-@node Scrolling conservatively, Changing the time stamp format, Using fly spell mode, Hacking and Tweaking
+@node Scrolling conservatively
 @section Scrolling conservatively
 @cindex input line
 @cindex scrolling
@@ -850,7 +850,7 @@ window when possible.  The following snippet uses a local value for
 @xref{Scrolling, , Scrolling conservatively, emacs, The GNU Emacs
 Manual}, for details.
 
-@node Changing the time stamp format, Defining a new command, Scrolling conservatively, Hacking and Tweaking
+@node Changing the time stamp format
 @section Changing the time stamp format
 @cindex time stamp
 @cindex date time
@@ -864,7 +864,7 @@ how to include the date in the time stamp:
 (setq rcirc-time-format "%Y-%m-%d %H:%M ")
 @end example
 
-@node Defining a new command, Reconnecting after you have lost the connection, Changing the time stamp format, Hacking and Tweaking
+@node Defining a new command
 @section Defining a new command
 @cindex defining commands
 @cindex commands, defining
@@ -887,7 +887,7 @@ because @code{defun-rcirc-command} is not yet available, and without
                          (concat "I use " rcirc-id-string))))
 @end smallexample
 
-@node Reconnecting after you have lost the connection, , Defining a new command, Hacking and Tweaking
+@node Reconnecting after you have lost the connection
 @section Reconnecting after you have lost the connection
 @cindex reconnecting
 @cindex disconnecting servers, reconnecting
@@ -928,20 +928,20 @@ The real answer, therefore, is a @code{/reconnect} command:
                       channels))))
 @end smallexample
 
-@node GNU Free Documentation License, Key Index, Hacking and Tweaking, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
 
-@node Key Index, Variable Index, GNU Free Documentation License, Top
+@node Key Index
 @unnumbered Key Index
 @printindex ky
 
-@node Variable Index, Index, Key Index, Top
+@node Variable Index
 @unnumbered Variable Index
 @printindex vr
 
-@node Index, , Variable Index, Top
+@node Index
 @unnumbered Index
 @printindex cp
 
diff --git a/doc/misc/remember.texi b/doc/misc/remember.texi
index af1121a0d10..bdb7afbe54c 100644
--- a/doc/misc/remember.texi
+++ b/doc/misc/remember.texi
@@ -44,8 +44,7 @@ modify this GNU manual.''
 @contents
 
 @ifnottex
-@node Top, Preface, (dir), (dir)
-@comment  node-name,  next,  previous,  up
+@node Top
 @top Remember
 
 @insertcopying
@@ -76,8 +75,7 @@ Backends
 @end detailmenu
 @end menu
 
-@node Preface, Introduction, Top, Top
-@comment  node-name,  next,  previous,  up
+@node Preface
 @chapter Preface
 
 This document describes remember-el, which was written by John Wiegley,
@@ -87,8 +85,7 @@ developers.
 This document is a work in progress, and your contribution will be
 greatly appreciated.
 
-@node Introduction, Installation, Preface, Top
-@comment  node-name,  next,  previous,  up
+@node Introduction
 @chapter Introduction
 
 Todo lists, schedules, phone databases... everything we use databases
@@ -130,8 +127,7 @@ in order to record them---it would map much more closely to how the mind
 manual-ness which computers from the very beginning have been championed
 as being able to reduce.
 
-@node Installation, Implementation, Introduction, Top
-@comment  node-name,  next,  previous,  up
+@node Installation
 @chapter Installation
 
 Installing Remember Mode is as simple as adding the following lines to
@@ -143,8 +139,7 @@ your Emacs configuration file (usually @file{~/.emacs.d/init.el} or
 (require 'remember)
 @end lisp
 
-@node Implementation, Quick Start, Installation, Top
-@comment  node-name,  next,  previous,  up
+@node Implementation
 @chapter Implementation
 
 Hyperbole, as a data presentation tool, always struck me as being very
@@ -185,8 +180,7 @@ rather than requiring a billion keystrokes to reorganize your
 hierarchy.  Well, as the future arrives, hopefully experience and user
 feedback will help to make this as intuitive a tool as possible.
 
-@node Quick Start, Function Reference, Implementation, Top
-@comment  node-name,  next,  previous,  up
+@node Quick Start
 @chapter Quick Start
 
 @itemize
@@ -257,8 +251,7 @@ remember-annotation-functions. For example:
   (call-interactively 'remember)))
 @end lisp
 
-@node Function Reference, Keystrokes, Quick Start, Top
-@comment  node-name,  next,  previous,  up
+@node Function Reference
 @chapter Function Reference
 
 @file{remember.el} defines the following interactive functions:
@@ -291,8 +284,7 @@ buffer is used to collect data that you want remember.  Just hit
 the data for latter retrieval, and possible indexing.
 @end defun
 
-@node Keystrokes, Backends, Function Reference, Top
-@comment  node-name,  next,  previous,  up
+@node Keystrokes
 @chapter Keystroke Reference
 
 @file{remember.el} defines the following keybindings by default:
@@ -310,8 +302,7 @@ Remember the contents of the current buffer.
 
 @end table
 
-@node Backends, GNU Free Documentation License, Keystrokes, Top
-@comment  node-name,  next,  previous,  up
+@node Backends
 @chapter Backends
 
 You can save remembered notes to a variety of backends.
@@ -323,8 +314,7 @@ You can save remembered notes to a variety of backends.
 * Org::                         Saving to an Org Mode file.
 @end menu
 
-@node Text File, Diary, Backends, Backends
-@comment  node-name,  next,  previous,  up
+@node Text File
 @section Saving to a Text File
 @cindex text file, saving to
 
@@ -344,8 +334,7 @@ The file in which to store unprocessed data.
 The text used to begin each remember item.
 @end defopt
 
-@node Diary, Mailbox, Text File, Backends
-@comment  node-name,  next,  previous,  up
+@node Diary
 @section Saving to a Diary file
 @cindex diary, integration
 
@@ -362,8 +351,7 @@ File for extracted diary entries.
 If this is nil, then @code{diary-file} will be used instead."
 @end defopt
 
-@node Mailbox, Org, Diary, Backends
-@comment  node-name,  next,  previous,  up
+@node Mailbox
 @section Saving to a Mailbox
 @cindex mailbox, saving to
 
@@ -383,8 +371,7 @@ The file in which to store remember data as mail.
 The default priority for remembered mail messages.
 @end defopt
 
-@node Org, , Mailbox, Backends
-@comment  node-name,  next,  previous,  up
+@node Org
 @section Saving to an Org Mode file
 @cindex org mode, integration
 
@@ -398,12 +385,11 @@ for org-remember at @url{http://orgmode.org/org-remember.pdf}.
 For instructions on how to integrate Remember with Org Mode,
 consult @ref{Capture, , , org}.
 
-@node GNU Free Documentation License, Concept Index, Backends, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
-@node Concept Index,  , GNU Free Documentation License, Top
-@comment  node-name,  next,  previous,  up
+@node Concept Index
 @unnumbered Index
 
 @printindex cp
diff --git a/doc/misc/ses.texi b/doc/misc/ses.texi
index 1828ebd17be..259c1a1f391 100644
--- a/doc/misc/ses.texi
+++ b/doc/misc/ses.texi
@@ -49,7 +49,7 @@ modify this GNU manual.''
 @c ===================================================================
 
 @ifnottex
-@node Top, Sales Pitch, (dir), (dir)
+@node Top
 @comment  node-name,  next,  previous,  up
 @top @acronym{SES}: Simple Emacs Spreadsheet
 
@@ -76,7 +76,7 @@ To report bugs, send email to @email{jyavner@@member.fsf.org}.
 
 @c ===================================================================
 
-@node Sales Pitch, The Basics, Top, Top
+@node Sales Pitch
 @comment  node-name,  next,  previous,  up
 @chapter Sales Pitch
 @cindex features
@@ -98,7 +98,7 @@ To report bugs, send email to @email{jyavner@@member.fsf.org}.
 
 @c ===================================================================
 
-@node The Basics, Advanced Features, Sales Pitch, Top
+@node The Basics
 @comment  node-name,  next,  previous,  up
 @chapter The Basics
 @cindex basic commands
@@ -157,7 +157,7 @@ Highlight all cells (@code{mark-whole-buffer}).
 * Customizing @acronym{SES}::
 @end menu
 
-@node Formulas, Resizing, The Basics, The Basics
+@node Formulas
 @section Cell formulas
 @cindex formulas
 @cindex formulas, entering
@@ -210,7 +210,7 @@ Force recalculation of the current cell or range (@code{ses-recalculate-cell}).
 Recalculate the entire spreadsheet (@code{ses-recalculate-all}).
 @end table
 
-@node Resizing, Printer functions, Formulas, The Basics
+@node Resizing
 @section Resizing the spreadsheet
 @cindex resizing spreadsheets
 @findex ses-insert-row
@@ -266,7 +266,7 @@ Undo previous action (@code{(undo)}).
 @end table
 
 
-@node Printer functions, Clearing cells, Resizing, The Basics
+@node Printer functions
 @section Printer functions
 @cindex printer functions
 @findex ses-read-cell-printer
@@ -331,7 +331,7 @@ Centering with tildes (~) and spill-over.
 @end table
 
 
-@node Clearing cells, Copy/cut/paste, Printer functions, The Basics
+@node Clearing cells
 @section Clearing cells
 @cindex clearing commands
 @findex ses-clear-cell-backward
@@ -348,7 +348,7 @@ Clear cell and move right (@code{ses-clear-cell-forward}).
 @end table
 
 
-@node Copy/cut/paste, Customizing @acronym{SES}, Clearing cells, The Basics
+@node Copy/cut/paste
 @section Copy, cut, and paste
 @cindex copy
 @cindex cut
@@ -423,7 +423,7 @@ Emacs yank-pop, the @acronym{SES} version uses @code{undo} to delete the old
 yank.  This doesn't make any difference?
 @end table
 
-@node Customizing @acronym{SES},  , Copy/cut/paste, The Basics
+@node Customizing @acronym{SES}
 @section Customizing @acronym{SES}
 @cindex customizing
 @vindex enable-local-eval
@@ -460,7 +460,7 @@ safety belts!
 
 @c ===================================================================
 
-@node Advanced Features, For Gurus, The Basics, Top
+@node Advanced Features
 @chapter Advanced Features
 @cindex advanced features
 @findex ses-read-header-row
@@ -503,7 +503,7 @@ repair that use function @code{ses-repair-cell-reference-all}
 * Spreadsheets with details and summary::
 @end menu
 
-@node The print area, Ranges in formulas, Advanced Features, Advanced Features
+@node The print area
 @section The print area
 @cindex print area
 @findex widen
@@ -529,7 +529,7 @@ Recreate print area by reevaluating printer functions for all cells
 (@code{ses-reprint-all}).
 @end table
 
-@node Ranges in formulas, Sorting by column, The print area, Advanced Features
+@node Ranges in formulas
 @section Ranges in formulas
 @cindex ranges
 @findex ses-insert-range-click
@@ -635,7 +635,7 @@ is only one row or column in the range, that is to say the
 corresponding matrix is flattened.
 @end table
 
-@node Sorting by column, Standard formula functions, Ranges in formulas, Advanced Features
+@node Sorting by column
 @section Sorting by column
 @cindex sorting
 @findex ses-sort-column
@@ -664,7 +664,7 @@ formulas that refer to other rows in the range or to cells outside the
 range.
 
 
-@node Standard formula functions, More on cell printing, Sorting by column, Advanced Features
+@node Standard formula functions
 @section Standard formula functions
 @cindex standard formula functions
 @cindex *skip*
@@ -689,7 +689,7 @@ Average of non-blank elements in @var{list}.  Here the list is passed
 as a single argument, since you'll probably use it with @code{ses-range}.
 @end table
 
-@node More on cell printing, Import and export, Standard formula functions, Advanced Features
+@node More on cell printing
 @section More on cell printing
 @cindex cell printing, more
 @findex ses-truncate-cell
@@ -737,7 +737,7 @@ that are empty of contain strings will use the fallback printer.
 argument type''.
 
 
-@node Import and export, Virus protection, More on cell printing, Advanced Features
+@node Import and export
 @section Import and export
 @cindex import and export
 @cindex export, and import
@@ -757,7 +757,7 @@ another buffer.  Columns are separated by tabs, rows by newlines.
 To import text, use any of the yank commands where the text to paste
 contains tabs and/or newlines.  Imported formulas are not relocated.
 
-@node Virus protection, Spreadsheets with details and summary, Import and export, Advanced Features
+@node Virus protection
 @section Virus protection
 @cindex virus protection
 
@@ -784,7 +784,7 @@ parts of the Emacs Lisp environment can be excluded without cramping
 your style as a formula-writer.  See the documentation in @file{unsafep.el}
 for more info on how Lisp forms are classified as safe or unsafe.
 
-@node Spreadsheets with details and summary,  , Virus protection, Advanced Features
+@node Spreadsheets with details and summary
 @section Spreadsheets with details and summary
 @cindex details and summary
 @cindex summary, and details
@@ -820,7 +820,7 @@ details-and-summary spreadsheet.
 
 @c ===================================================================
 
-@node For Gurus, Index, Advanced Features, Top
+@node For Gurus
 @chapter For Gurus
 @cindex advanced features
 
@@ -832,7 +832,7 @@ details-and-summary spreadsheet.
 * Uses of defadvice in @acronym{SES}::
 @end menu
 
-@node Deferred updates, Nonrelocatable references, For Gurus, For Gurus
+@node Deferred updates
 @section Deferred updates
 @cindex deferred updates
 @cindex updates, deferred
@@ -864,7 +864,7 @@ a momentary glitch after C-x C-v and certain scrolling commands.  You
 can type ahead without worrying about the glitch.
 
 
-@node Nonrelocatable references, The data area, Deferred updates, For Gurus
+@node Nonrelocatable references
 @section Nonrelocatable references
 @cindex nonrelocatable references
 @cindex references, nonrelocatable
@@ -892,7 +892,7 @@ to get the value from the leftmost column in the current row.  This
 kind of dependency is also not recorded.
 
 
-@node The data area, Buffer-local variables in spreadsheets, Nonrelocatable references, For Gurus
+@node The data area
 @section The data area
 @cindex data area
 @findex ses-reconstruct-all
@@ -924,7 +924,7 @@ data structures:
 @end table
 
 
-@node Buffer-local variables in spreadsheets, Uses of defadvice in @acronym{SES}, The data area, For Gurus
+@node Buffer-local variables in spreadsheets
 @section Buffer-local variables in spreadsheets
 @cindex buffer-local variables
 @cindex variables, buffer-local
@@ -958,7 +958,7 @@ avoid virus warnings, each function used in a formula needs
 (put 'your-function-name 'safe-function t)
 @end lisp
 
-@node Uses of defadvice in @acronym{SES},  , Buffer-local variables in spreadsheets, For Gurus
+@node Uses of defadvice in @acronym{SES}
 @section Uses of defadvice in @acronym{SES}
 @cindex defadvice
 @cindex undo-more
@@ -985,14 +985,14 @@ cell.
 @end table
 
 @c ===================================================================
-@node Index, Acknowledgments, For Gurus, Top
+@node Index
 @unnumbered Index
 
 @printindex cp
 
 @c ===================================================================
 
-@node Acknowledgments, GNU Free Documentation License, Index, Top
+@node Acknowledgments
 @chapter Acknowledgments
 
 Coding by:
@@ -1034,7 +1034,7 @@ Jean-Philippe Theberge @email{jphil@@acs.pagesjaunes.fr}
 
 @c ===================================================================
 
-@node GNU Free Documentation License, , Acknowledgments, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
diff --git a/doc/misc/speedbar.texi b/doc/misc/speedbar.texi
index ac12d4a65a6..92584bf51f9 100644
--- a/doc/misc/speedbar.texi
+++ b/doc/misc/speedbar.texi
@@ -37,8 +37,7 @@ modify this GNU manual.''
 
 @contents
 
-@node Top, , , (dir)Top
-@comment  node-name,  next,  previous,  up
+@node Top
 @top Speedbar
 
 Speedbar is a program for Emacs which can be used to summarize
@@ -83,8 +82,7 @@ on.  @xref{Basic Navigation}.
 * Index::
 @end menu
 
-@node Introduction, Basic Navigation, , Top
-@comment  node-name,  next,  previous,  up
+@node Introduction
 @chapter Introduction
 @cindex introduction
 
@@ -115,8 +113,7 @@ The function to use when switching between frames using the keyboard is
 @code{speedbar-get-focus}.  This function will toggle between frames, and
 it's useful to bind it to a key in terminal mode.  @xref{Customizing}.
 
-@node Basic Navigation, File Mode, Introduction, Top
-@comment  node-name,  next,  previous,  up
+@node Basic Navigation
 @chapter Basic Navigation
 
 Speedbar can display different types of data, and has several display
@@ -131,8 +128,7 @@ to use.
 * Displays Submenu::
 @end menu
 
-@node Basic Key Bindings, Basic Visuals, Basic Navigation, Basic Navigation
-@comment  node-name,  next,  previous,  up
+@node Basic Key Bindings
 @section Basic Key Bindings
 @cindex key bindings
 
@@ -205,8 +201,7 @@ flushed.  This is similar to a power click.  @xref{Mouse Bindings}.
 Contract the current group, hiding sub items.
 @end table
 
-@node Basic Visuals, Mouse Bindings, Basic Key Bindings, Basic Navigation
-@comment  node-name,  next,  previous,  up
+@node Basic Visuals
 @section Basic Visuals
 @cindex visuals
 
@@ -307,8 +302,7 @@ The face naming convention mirrors the File display mode.  Modes which
 do not use files will attempt to use the same colors on analogous
 entries.
 
-@node Mouse Bindings, Displays Submenu, Basic Visuals, Basic Navigation
-@comment  node-name,  next,  previous,  up
+@node Mouse Bindings
 @section Mouse Bindings
 @cindex mouse bindings
 
@@ -352,8 +346,7 @@ should be displayed in the minibuffer of the attached frame.  Sometimes
 this can contain extra information such as file permissions, or tag
 location.
 
-@node Displays Submenu, , Mouse Bindings, Basic Navigation
-@comment  node-name,  next,  previous,  up
+@node Displays Submenu
 @section Displays Submenu
 @cindex displays submenu
 
@@ -369,8 +362,7 @@ The contents are modes currently loaded into emacs.  By default, this
 would include Files, Quick Buffers, and Buffers.  Other major display
 modes such as Info are loaded separately.
 
-@node File Mode, Buffer Mode, Basic Navigation, Top
-@comment  node-name,  next,  previous,  up
+@node File Mode
 @chapter File Mode
 @cindex file mode
 
@@ -387,8 +379,7 @@ Advanced behavior, like copying and renaming files, is also provided.
 * File Key Bindings::   Performing file operations.
 @end menu
 
-@node Directory Display, Hidden Files, File Mode, File Mode
-@comment  node-name,  next,  previous,  up
+@node Directory Display
 @section Directory Display
 @cindex directory display
 
@@ -471,8 +462,7 @@ Some group names may say something like @samp{speedbar-t to speedbar-v},
 indicating that all symbols which alphabetically fall between those
 categories are included in that sub-group.  @xref{Tag Hierarchy Methods}.
 
-@node Hidden Files, File Key Bindings, Directory Display, File Mode
-@comment  node-name,  next,  previous,  up
+@node Hidden Files
 @section Hidden Files
 @cindex hidden files
 
@@ -498,8 +488,7 @@ Object files fall into the category of level 2 hidden files.  You can
 determine their presence by the @samp{#} and @samp{!} file indicators.
 @xref{Directory Display}.
 
-@node File Key Bindings, , Hidden Files, File Mode
-@comment  node-name,  next,  previous,  up
+@node File Key Bindings
 @section File Key Bindings
 @cindex file key bindings
 
@@ -537,8 +526,7 @@ list, are shown.  By showing all files, additional files such as text files are
 also displayed, but they are prefixed with the @samp{[?]} symbol.  This
 means that it is a file, but Emacs doesn't know how to expand it.
 
-@node Buffer Mode, Minor Modes, File Mode, Top
-@comment  node-name,  next,  previous,  up
+@node Buffer Mode
 @chapter Buffer Mode
 @cindex buffer mode
 
@@ -569,8 +557,7 @@ Thus, if you are in File mode, and you need quick access to a buffer,
 press @kbd{b}, click on the buffer you want, and speedbar will revert
 back to File mode.
 
-@node Minor Modes, Customizing, Buffer Mode, Top
-@comment  node-name,  next,  previous,  up
+@node Minor Modes
 @chapter Minor Display Modes
 @cindex minor display modes
 
@@ -592,8 +579,7 @@ key bindings and visuals, but will have specialized behaviors.
             stack trace.
 @end menu
 
-@node RMAIL, Info, Minor Modes, Minor Modes
-@comment  node-name,  next,  previous,  up
+@node RMAIL
 @section RMAIL
 @cindex RMAIL
 
@@ -614,8 +600,7 @@ the current RMAIL folder into a different folder by clicking the
 In this way you can manage your existing RMAIL folders fairly easily
 using the mouse.
 
-@node Info, GDB, RMAIL, Minor Modes
-@comment  node-name,  next,  previous,  up
+@node Info
 @section Info
 @cindex Info
 
@@ -629,8 +614,7 @@ are available.  Since these sub-topics are not examined until you click
 the @samp{[+]} button, sometimes a @samp{[?]} will appear when you click on
 a @samp{[+]}, indicating that there are no sub-topics.
 
-@node GDB, , Info, Minor Modes
-@comment  node-name,  next,  previous,  up
+@node GDB
 @section GDB
 @cindex gdb
 @cindex gud
@@ -652,8 +636,7 @@ You can click on any stack element and gdb will move to that stack
 level.  You can then check variables local to that level at the GDB
 prompt.
 
-@node Customizing, Extending, Minor Modes, Top
-@comment  node-name,  next,  previous,  up
+@node Customizing
 @chapter Customizing
 @cindex customizing
 
@@ -680,8 +663,7 @@ Customize speedbar's many colors and fonts.
 * Hooks::                   The many hooks you can use.
 @end menu
 
-@node Frames and Faces, Tag Hierarchy Methods, Customizing, Customizing
-@comment  node-name,  next,  previous,  up
+@node Frames and Faces
 @section Frames and Faces
 @cindex faces
 @cindex frame parameters
@@ -725,8 +707,7 @@ it.
 In XEmacs, change the plist @code{speedbar-frame-plist}.  This is the
 XEmacs way of doing the same thing.
 
-@node Tag Hierarchy Methods, Version Control, Frames and Faces, Customizing
-@comment  node-name,  next,  previous,  up
+@node Tag Hierarchy Methods
 @section Tag Hierarchy Methods
 @cindex tag hierarchy
 @cindex tag groups
@@ -805,8 +786,7 @@ are next to each other, then they are combined until this number of
 items is reached.
 @end table
 
-@node Version Control, Hooks, Tag Hierarchy Methods, Customizing
-@comment  node-name,  next,  previous,  up
+@node Version Control
 @section Version Control
 @cindex version control
 @cindex vc extensions
@@ -840,8 +820,7 @@ placed near this file.
 Lastly, you can change the VC indicator using the variable
 @code{speedbar-vc-indicator}, and specify a single character string.
 
-@node Hooks, , Version Control, Customizing
-@comment  node-name,  next,  previous,  up
+@node Hooks
 @section Hooks
 @cindex hooks
 
@@ -883,8 +862,7 @@ Set this to implement your own scanning or rescan safe functions with
 state data.
 @end table
 
-@node Extending, GNU Free Documentation License, Customizing, Top
-@comment  node-name,  next,  previous,  up
+@node Extending
 @chapter Extending
 @cindex extending
 
@@ -908,7 +886,7 @@ create specialized tagging functions.
 * Creating a display::     How to insert buttons and hierarchies.
 @end menu
 
-@node Minor Display Modes, Major Display Modes, Extending, Extending
+@node Minor Display Modes
 @section Minor Display Modes
 @cindex create minor display mode
 
@@ -966,7 +944,7 @@ want to do is execute a check to see if you need to re-create your
 display.  If it needs to be cleared, you need to erase the speedbar
 buffer yourself, and start drawing buttons.  @xref{Creating a display}.
 
-@node Major Display Modes, Tagging Extensions, Minor Display Modes, Extending
+@node Major Display Modes
 @section Major Display Modes
 @cindex create major display mode
 
@@ -1097,7 +1075,7 @@ Your custom function might look like this:
 Once you have done all this, speedbar will show an entry in the
 @samp{Displays} menu declaring that your extension is available.
 
-@node Tagging Extensions, Creating a display, Major Display Modes, Extending
+@node Tagging Extensions
 @section Tagging Extensions
 
 It is possible to create new methods for tagging files in speedbar.
@@ -1137,7 +1115,7 @@ If your parser is only good for a few types of files, make sure that it
 is either a buffer local modification, or that the tag generator returns
 @code{t} for non valid buffers.
 
-@node Creating a display, , Tagging Extensions, Extending
+@node Creating a display
 @section Creating a display
 @cindex creating a display
 
@@ -1239,13 +1217,12 @@ Two good values are @code{nil} and @code{statictag}.
 
 @end defun
 
-@node GNU Free Documentation License, Index, Extending, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi
 
 
-@node Index, , GNU Free Documentation License, Top
-@comment  node-name,  next,  previous,  up
+@node Index
 @unnumbered Concept Index
 @printindex cp
 
diff --git a/doc/misc/vip.texi b/doc/misc/vip.texi
index f977387c414..de394cd8c46 100644
--- a/doc/misc/vip.texi
+++ b/doc/misc/vip.texi
@@ -40,7 +40,7 @@ modify this GNU manual.''
 @end direntry
 
 @ifnottex
-@node Top, Survey,, (DIR)
+@node Top
 @top VIP
 
 VIP is a Vi emulating package written in Emacs Lisp.  VIP implements most
@@ -90,7 +90,7 @@ Comments and bug reports are welcome.  Please send messages to
 @code{masahiko@@unsun.riec.tohoku.junet} if you are in Japan.
 @end iftex
 
-@node Survey, Basic Concepts, Top, Top
+@node Survey
 @chapter A Survey of VIP
 
 In this chapter we describe basics of VIP with emphasis on the features not
@@ -104,7 +104,7 @@ found in Vi and on how to use VIP under GNU Emacs.
 * Differences from Vi:: Differences of VIP from Vi is explained.
 @end menu
 
-@node Basic Concepts, Loading VIP, Survey, Survey
+@node Basic Concepts
 @section Basic Concepts
 
 We begin by explaining some basic concepts of Emacs.  These concepts are
@@ -151,7 +151,7 @@ be executed when you type the key.  If no function is bound to a key in the
 local map, however, the function bound to the key in the global map becomes
 in effect.@refill
 
-@node Loading VIP, Modes in VIP, Basic Concepts, Survey
+@node Loading VIP
 @section Loading VIP
 
 The recommended way to load VIP automatically is to include the line:
@@ -177,7 +177,7 @@ M-x vip-mode
 @end example
 @noindent
 
-@node Modes in VIP, Emacs Mode, Loading VIP, Survey
+@node Modes in VIP
 @section Modes in VIP
 
 @kindex 032 @kbd{C-z} (@code{vip-change-mode-to-vi})
@@ -257,7 +257,7 @@ emacs mode             vi mode                 insert mode
                           know enough Emacs commands.
 @end menu
 
-@node Emacs Mode, Vi Mode, Modes in VIP, Modes in VIP
+@node Emacs Mode
 @subsection Emacs Mode
 
 @kindex 032 @kbd{C-z} (@code{vip-change-mode-to-vi})
@@ -267,14 +267,14 @@ normal Emacs editing in this mode.  Note that the key @kbd{C-z} is globally
 bound to @code{vip-change-mode-to-vi}.  So, if you type @kbd{C-z} in this mode
 then you will be in vi mode.@refill
 
-@node Vi Mode, Insert Mode, Emacs Mode, Modes in VIP
+@node Vi Mode
 @subsection Vi Mode
 
 This mode corresponds to Vi's command mode.  Most Vi commands work as they
 do in Vi.  You can go back to emacs mode by typing @kbd{C-z}.  You can
 enter insert mode, just as in Vi, by typing @kbd{i}, @kbd{a} etc.
 
-@node Insert Mode, Differences from Vi, Vi Mode, Modes in VIP
+@node Insert Mode
 @subsection Insert Mode
 
 The key bindings in this mode is the same as in the emacs mode except for
@@ -298,7 +298,7 @@ Thus typing @kbd{C-z x} in insert mode will have the same effect as typing
 @kbd{ESC x} in emacs mode.
 @end table
 
-@node Differences from Vi, Undoing, Insert Mode, Survey
+@node Differences from Vi
 @section Differences from Vi
 
 The major differences from Vi are explained below.
@@ -323,7 +323,7 @@ The major differences from Vi are explained below.
 * Misc Commands::       Other useful commands.
 @end menu
 
-@node Undoing, Changing, Differences from Vi, Differences from Vi
+@node Undoing
 @subsection Undoing
 
 @kindex 165 @kbd{u} (@code{vip-undo})
@@ -334,7 +334,7 @@ a single change, while @kbd{u .@: .@: .@:}, for instance, will undo 4 previous
 changes.  Undo is undoable as in Vi.  So the content of the buffer will
 be the same before and after @kbd{u u}.@refill
 
-@node Changing, Searching, Undoing, Differences from Vi
+@node Changing
 @subsection Changing
 
 Some commands which change a small number of characters are executed
@@ -347,7 +347,7 @@ then VIP will prompt you for a new word in the minibuffer by the prompt
 @kindex 007 @kbd{C-g} (@code{vip-keyboard-quit})
 you can abort a partially formed command by typing @kbd{C-g}.@refill
 
-@node Searching, z Command, Changing, Differences from Vi
+@node Searching
 @subsection Searching
 
 @kindex 057 @kbd{/} (@code{vip-search-forward})
@@ -363,7 +363,7 @@ search string.  (It is a limitation.)  By default, search will wrap around
 the buffer as in Vi.  You can change this by rebinding the variable
 @code{vip-search-wrap-around}.  @xref{Customization}, for how to do this.@refill
 
-@node z Command, Counts, Searching, Differences from Vi
+@node z Command
 @subsection z Command
 
 @kindex 1723 @kbd{z H} (@code{vip-line-to-top})
@@ -378,7 +378,7 @@ For those of you who cannot remember which of @kbd{z} followed by @key{RET},
 @kbd{M} and @kbd{L} to place the current line in the Home (Middle, and
 Last) line of the window.@refill
 
-@node Counts, Marking, z Command, Differences from Vi
+@node Counts
 @subsection Counts
 
 Some Vi commands which do not accept a count now accept one
@@ -404,7 +404,7 @@ line.
 Given a count @var{n}, @var{n}-th occurrence will be searched.
 @end table
 
-@node Marking, Region Commands, Counts, Differences from Vi
+@node Marking
 @subsection Marking
 
 Typing an @kbd{m} followed by a lower-case character @var{ch} marks the
@@ -424,7 +424,7 @@ Set mark at point (and push old mark on mark ring).
 Jump to mark (and pop mark off the mark ring).
 @end table
 
-@node Region Commands, New Commands, Marking, Differences from Vi
+@node Region Commands
 @subsection Region Commands
 
 @cindex region
@@ -438,7 +438,7 @@ of @kbd{r} the region will first be enlarged so that it will become the
 smallest region containing the original region and consisting of whole
 lines.  Thus @kbd{m .@: d R} will have the same effect as @kbd{d d}.@refill
 
-@node New Commands, New Bindings, Region Commands, Differences from Vi
+@node New Commands
 @subsection Some New Commands
 
 Note that the keys below (except for @kbd{R}) are not used in Vi.
@@ -530,7 +530,7 @@ Check spelling of words in the region (@code{spell-region}).
 Call last keyboard macro.
 @end table
 
-@node New Bindings, Window Commands, New Commands, Differences from Vi
+@node New Bindings
 @subsection New Key Bindings
 
 In VIP the meanings of some keys are entirely different from Vi.  These key
@@ -590,7 +590,7 @@ In addition to these, @code{ctl-x-map} is slightly modified:
 This is equivalent to @kbd{C-x 1 C-x 2} (1 + 2 = 3).
 @end table
 
-@node Window Commands, Buffer Commands, New Bindings, Differences from Vi
+@node Window Commands
 @subsection Window Commands
 
 In this and following subsections, we give a summary of key bindings for
@@ -614,7 +614,7 @@ Split current window into two windows.
 Show current buffer in two windows.
 @end table
 
-@node Buffer Commands, File Commands, Window Commands, Differences from Vi
+@node Buffer Commands
 @subsection Buffer Commands
 
 @table @kbd
@@ -635,7 +635,7 @@ Kill the current buffer if it is not modified.
 Save the current buffer in the file associated to the buffer.
 @end table
 
-@node File Commands, Misc Commands, Buffer Commands, Differences from Vi
+@node File Commands
 @subsection File Commands
 
 @table @kbd
@@ -656,7 +656,7 @@ Write current buffer into the specified file.
 Insert specified file at point.
 @end table
 
-@node Misc Commands, Vi Commands, File Commands, Differences from Vi
+@node Misc Commands
 @subsection Miscellaneous Commands
 
 @table @kbd
@@ -683,7 +683,7 @@ Query replace.
 Replace.
 @end table
 
-@node Vi Commands, Numeric Arguments, Misc Commands, Top
+@node Vi Commands
 @chapter Vi Commands
 
 This chapter describes Vi commands other than Ex commands implemented in
@@ -704,7 +704,7 @@ commands described in this chapter are to be used in vi mode.
 * Commands in Insert Mode::  Commands for entering insert mode.
 @end menu
 
-@node Numeric Arguments, Important Keys, Vi Commands, Vi Commands
+@node Numeric Arguments
 @section Numeric Arguments
 
 @cindex numeric arguments
@@ -725,7 +725,7 @@ In many cases, if a count is given, the command is executed that many times.
 For instance, @kbd{5 d d} deletes 5 lines while simple @kbd{d d} deletes a
 line.  In this manual the metavariable @var{n} will denote a count.@refill
 
-@node Important Keys, Buffers and Windows, Numeric Arguments, Vi Commands
+@node Important Keys
 @section Important Keys
 
 The keys @kbd{C-g} and @kbd{C-l} are unique in that their associated
@@ -775,7 +775,7 @@ typing @kbd{\}.  Thus @kbd{5 \ +}, as well as @kbd{\ C-u 5 +}, will insert
 @samp{+++++} before point.@refill
 @end table
 
-@node Buffers and Windows, Files, Important Keys, Vi Commands
+@node Buffers and Windows
 @section Buffers and Windows
 
 @cindex buffer
@@ -842,7 +842,7 @@ by @key{RET}.  The default buffer name to switch to will also be prompted,
 and you can select it by giving a simple @key{RET}.  See GNU Emacs Manual
 for details of completion.
 
-@node Files, Viewing the Buffer, Buffers and Windows, Vi Commands
+@node Files
 @section Files
 
 We have the following commands related to files.  They are used to visit,
@@ -923,7 +923,7 @@ case), you can just say @kbd{X S}.  If you wish to save it in another file,
 you can type @kbd{X W}.  You will then get a similar prompt as you get for
 @kbd{v}, to which you can enter the file name.@refill
 
-@node Viewing the Buffer, Mark Commands, Files, Vi Commands
+@node Viewing the Buffer
 @section Viewing the Buffer
 
 In this and next section we discuss commands for moving around in the
@@ -991,7 +991,7 @@ point will be placed in the @var{n}-th line from bottom
 Center point in window and redisplay screen (@code{recenter}).
 @end table
 
-@node Mark Commands, Motion Commands, Viewing the Buffer, Vi Commands
+@node Mark Commands
 @section Mark Commands
 
 The following commands are used to mark positions in the buffer.
@@ -1019,7 +1019,7 @@ latest element of the mark ring (replacing the oldest one).  By repeating
 the command `@kbd{m ,}' you can visit older and older marked positions.  You
 will eventually be in a loop as the mark ring is a ring.
 
-@node Motion Commands, Searching and Replacing, Mark Commands, Vi Commands
+@node Motion Commands
 @section Motion Commands
 
 Commands for moving around in the current buffer are collected here.  These
@@ -1213,7 +1213,7 @@ Repeat previous @kbd{f}, @kbd{t}, @kbd{F} or @kbd{T} command, in the
 opposite direction (@code{vip-repeat-find-opposite}).
 @end table
 
-@node Searching and Replacing, Modifying Commands, Motion Commands, Vi Commands
+@node Searching and Replacing
 @section Searching and Replacing
 
 Following commands are available for searching and replacing.
@@ -1277,7 +1277,7 @@ count, replace that many characters by @var{ch} (@code{vip-replace-char}).
 The commands @kbd{/} and @kbd{?} mark point before move, so that you can
 return to the original point by @w{@kbd{` `}}.
 
-@node Modifying Commands, Delete Commands, Searching and Replacing, Vi Commands
+@node Modifying Commands
 @section Modifying Commands
 
 In this section, commands for modifying the content of a buffer are
@@ -1315,7 +1315,7 @@ command.
 * Change Commands::     Commands for changing text.
 * Repeating and Undoing Modifications::
 @end menu
-@node Delete Commands, Yank Commands, Modifying Commands, Modifying Commands
+@node Delete Commands
 @subsection Delete Commands
 
 @table @kbd
@@ -1367,7 +1367,7 @@ Delete a character before point.  Given @var{n}, delete @var{n} characters
 (@code{vip-delete-backward-char}).
 @end table
 
-@node Yank Commands, Put Back Commands, Delete Commands, Modifying Commands
+@node Yank Commands
 @subsection Yank Commands
 
 @cindex yank
@@ -1403,7 +1403,7 @@ Yank current region.
 Expand current region and yank it.
 @end table
 
-@node Put Back Commands, Change Commands, Yank Commands, Modifying Commands
+@node Put Back Commands
 @subsection Put Back Commands
 Deleted or yanked texts can be put back into the buffer by the command
 below.
@@ -1434,7 +1434,7 @@ numeral between @kbd{1} and @kbd{9}.  If the number register @var{n} is
 specified, @var{n}-th previously deleted/yanked text will be put back.  It
 is an error to specify a number register for the delete/yank commands.
 
-@node Change Commands, Repeating and Undoing Modifications, Put Back Commands, Modifying Commands
+@node Change Commands
 @subsection Change Commands
 
 Most commonly used change command takes the following form.
@@ -1467,7 +1467,7 @@ Change current region.
 Expand current region and change it.
 @end table
 
-@node Repeating and Undoing Modifications, Other Vi Commands, Change Commands, Modifying Commands
+@node Repeating and Undoing Modifications
 @subsection Repeating and Undoing Modifications
 
 VIP records the previous modifying command, so that it is easy to repeat
@@ -1487,7 +1487,7 @@ count for the repeated command.  Otherwise, the count for the last
 modifying command is used again (@code{vip-repeat}).
 @end table
 
-@node Other Vi Commands, Commands in Insert Mode, Repeating and Undoing Modifications, Vi Commands
+@node Other Vi Commands
 @section Other Vi Commands
 
 Miscellaneous Vi commands are collected here.
@@ -1608,7 +1608,7 @@ command @kbd{P} or @kbd{p} can retrieve it from kill ring
 (@code{kill-region}).
 @end table
 
-@node Commands in Insert Mode, Ex Commands, Other Vi Commands, Vi Commands
+@node Commands in Insert Mode
 @section Insert Mode
 
 You can enter insert mode by one of the following commands.  In addition to
@@ -1676,7 +1676,7 @@ start point is saved for later use by repeat command etc.  Therefore, repeat
 command will not really repeat insertion if you move point by emacs
 commands while in insert mode.
 
-@node Ex Commands, Ex Command Reference, Commands in Insert Mode, Top
+@node Ex Commands
 @chapter Ex Commands
 
 @kindex 072 @kbd{:} (@code{vip-ex})
@@ -1713,7 +1713,7 @@ character @samp{|}.
 @menu
 * Ex Command Reference::        Explain all the Ex commands available in VIP.
 @end menu
-@node Ex Command Reference, Customization, Ex Commands, Ex Commands
+@node Ex Command Reference
 @section Ex Command Reference
 In this section we briefly explain all the Ex commands supported by VIP@.
 Most Ex commands expect @var{address} as their argument, and they use
@@ -1859,7 +1859,7 @@ The following Ex commands are available in Vi, but not implemented in VIP.
 @kbd{unabbreviate}, @kbd{xit}, @kbd{z}
 @end example
 
-@node Customization, Customizing Constants, Ex Command Reference, Top
+@node Customization
 @chapter Customization
 
 If you have a file called @file{.vip} in your home directory, then it
@@ -1871,7 +1871,7 @@ customizing VIP.
 * Customizing Key Bindings::    How to change key bindings.
 @end menu
 
-@node Customizing Constants, Customizing Key Bindings, Customization, Customization
+@node Customizing Constants
 @section Customizing Constants
 An easy way to customize VIP is to change the values of constants used
 in VIP@.  Here is the list of the constants used in VIP and their default
@@ -1907,7 +1907,7 @@ can include a line like this in your @file{.vip} file:
 (setq vip-case-fold-search t)
 @end example
 
-@node Customizing Key Bindings,, Customizing Constants, Customization
+@node Customizing Key Bindings
 @section Customizing Key Bindings
 
 @cindex local keymap
@@ -1931,7 +1931,7 @@ file.
 (define-key vip-command-mode-map "X" 'vip-delete-backward-char)
 @end example
 
-@node GNU Free Documentation License,,, Top
+@node GNU Free Documentation License
 @appendix GNU Free Documentation License
 @include doclicense.texi